MSGID: 1:103/705.782 71a7eb86   
   CHRS: IBMPC 2   
   TZUTC: -0500   
   REPLY: 2:2/29 71ae7103   
   //Hello Tim,//   
   Thank you for the info. Got it set up.   
      
   Viele Gruesse aus Texas   
   øRalf   
      
   on *12.05.25* at *9:12:05* You wrote in area *WINPOINT*   
   to *Ralf Voepel* about *"Re: Origin"*.   
      
    TS> Hello Ralf,   
      
    TS> on 09.05.25 at 1:14:14 You wrote in Area WINPOINT to All about "Origin".   
      
    RV>>   Re: Origin   
    RV>>   By: Ralf Voepel to All on Sun May 04 2025 01:55 pm   
      
    >>> Hello All,   
    >>> Got a couple of questions:   
    >>> Where are the Origins stored and   
    >>> how can I change the font and spacing in the Message Editor. Have a great   
    >>> day   
    RV>>  >   
    >>> Ralf   
    RV>> Never mind. I found it.   
    RV>> What I still looking for is how to get a Nodelist imported. Guess I play   
    RV>> around with it. Have a great one.   
    RV>> ~RV   
    RV>> --- SBBSecho 3.25-Linux   
    RV>>  * Origin: Vertrauen - [vert/cvs/bbs].synchro.net (1:103/705)   
      
    TS> Make sure the settings for the nodelist under Settings/Nodelists are   
    TS> correct and either you have placed the nodelist file in the nodelist   
    TS> directory (settinge/Directories) or have a compressed nodelist in the   
    TS> inbound and have properly configured the archive file pattern.   
      
    TS> Nodelist processing can be manually triggered using "Fidont/Process   
    TS> Nodelists". However, most people configure WinPoint to automatically   
    TS> process incoming nodelist and/or nodediffs, so manual processing is   
    TS> usually not needed or only used for full nodelists while diffs are   
    TS> processed automatically.   
      
    TS> Most peoply tend to manually decompress the initial nodelist into the   
    TS> nodelist directory and setup the automatic processing for the incoming   
    TS> diffs. As an Example, to process the standard Fidonet nodediff incoming   
    TS> as compressed ZIP in the NODEDIFZ, setup the nodediffs part as:   
      
    TS> FileName: NODEDIFF   
    TS> Archive File Pattern: NODEFIFF.Z??   
    TS> File Area: NODEDIFZ   
      
    TS> This makes WP also look in the file area directory for NODEDIFZ for   
    TS> incoming files.   
      
    TS> Regards,   
    TS> Tim   
      
    TS> --- WinPoint 415.0   
    TS>  * Origin: Original WinPoint Origin! (2:2/29)   
   TTYL   
   Ralf Voepel   
   --- WinPoint 415.0   
    * Origin: Another Random *WinPoint* Origin! (1:103/705.782)   
   SEEN-BY: 2/29 103/705 105/81 106/201 124/5016 128/187 153/757 7715   
   SEEN-BY: 154/30 110 203/0 218/700 221/0 226/30 227/114 229/110 114   
   SEEN-BY: 229/317 426 428 452 470 664 700 705 240/1120 266/512 280/464   
   SEEN-BY: 280/5003 5555 291/111 292/854 8125 301/1 310/31 320/219 341/66   
   SEEN-BY: 341/234 396/45 460/58 467/888 633/280 712/848 770/1 902/26   
   SEEN-BY: 5020/400 5075/35   
   PATH: 103/705 280/464 292/854 229/426