MSGID: 2:221/1.58@fidonet 043f9434   
   PID: OpenXP/5.0.51 (Win32)   
   CHRS: ASCII 1   
   TZUTC: -0500   
   My new Crucial MX500 1TB 3D NAND SDD 2.5" drive should arrive     
   by Thursday.   
      
   In the past, I have generally either cloned a same-size hdd to     
   another hdd or used images.   
      
   But what is the procedure y'all would recommend for cloning an     
   HDD that has two partions (C and H) to a larger SSD?   
      
   The original system is XP.   
      
   I'm reading that perhaps Macrium Reflect 8 could do it.   
      
   Another product called AOMEI claims to do the same, but     
   expanding a partition requires a pay version of the program.   
   But it sounds to be the easiest to use.   
      
   But there are caveats in both wrt to "bootable" partitions.   
      
   What experiences have y'all had doing this?  And what tools     
   have you used for cloning an XP OS?   
      
   I'm somewhat familiar with some linux rescue disk software that     
   I could probably use for prepping the destination SSD prior to     
   the cloning.  But I would rather like to stick to one tool that     
   can do all necessary steps.   
      
      
   --- OpenXP 5.0.51   
    * Origin:  (2:221/1.58)   
   SEEN-BY: 1/19 123 15/0 16/0 19/10 37 90/1 105/81 106/201 120/340 123/130   
   SEEN-BY: 123/131 129/305 142/104 153/7715 203/0 218/700 221/1 6 360   
   SEEN-BY: 226/30 227/114 229/110 111 112 113 114 206 307 317 400 424   
   SEEN-BY: 229/426 428 452 470 550 664 700 240/5832 266/512 280/464   
   SEEN-BY: 280/5003 282/1038 292/854 301/1 317/3 320/119 219 319 2119   
   SEEN-BY: 322/0 757 326/101 342/200 396/45 423/81 460/58 633/280 712/848   
   PATH: 221/1 320/219 229/426