home bbs files messages ]

Just a sample of the Echomail archive

Cooperative anarchy at its finest, still active today. Darkrealms is the Zone 1 Hub.

   WINDOWS      Bill Gates farts and we can ALL smell it      3,071 messages   

[   << oldest   |   < older   |   list   |   newer >   |   newest >>   ]

   Message 2,483 of 3,071   
   Kurt Weiske to Mike Powell   
   Windows benchmarking   
   03 Mar 17 08:48:34   
   
     Re: Windows benchmarking   
     By: Mike Powell to All on Thu Mar 02 2017 06:46 pm   
      
   MP> I have recently been asked by a friend/co-worker if I would not mind   
   MP> looking at their machine sometime in the near future. I would like to but,   
   MP> while I don't have to come across as a know-it-all, I would like to not   
   MP> look stupid. I used to be pretty confident about stuff like this but, after   
   MP> using linux for so long, I have really lost touch with what can go wrong   
   MP> with Windows.    
      
   Things I've run into with my system in no particular order:   
      
   1. Run Disk Cleanup from Windows or ccleaner, I prefer the latter. Have it run   
   a registry check as well as disk cleaner. Having a temp file filled with   
   thousands of files can slow Windows down as it will need to access that   
   directory.   
      
   2. Windows defrag doesn't do as good of a job as third party defrags. Try   
   running mydefrag or another reputable defragger - after the disk cleanup.   
      
   3. Run HD Tune on the system and check to see that the HD system is running   
   well. It'll analagous to running timing tests with hdparm. My SATA mirror gives   
   me a speed of around 90-100 mb/sec max. If it's running on ATA drives and seems   
   way slow, like single or low digits, it may be that the storage controller in   
   Device Manager is set to PIO mode instead of DMA. There's a setting in device   
   manager for that.   
      
   4. Check out device manager and see if any hardware didn't install correctly.   
      
   5. Check under My Computer to see if any mapped drives no longer exist. That   
   can slow down file listings while the system looks for a non-existent drive and   
   times out.   
      
   6. Check the memory usage by hitting ctrl-alt-delete and selecting task   
   manager. If the system is running out of memory, then use the MSConfig program   
   to disable start up at boot for any programs you don't need. They'll start just   
   fine when you need them.   
      
   Those are the kind of things I've run into with my own system, hope this helps   
   point you in the right direction.   
   --- SBBSecho 3.00-Win32   
    * Origin: http://realitycheckbbs.org | tomorrow's retro tech (1:218/700)   

[   << oldest   |   < older   |   list   |   newer >   |   newest >>   ]


(c) 1994,  bbs@darkrealms.ca