TZUTC: -0400   
   MSGID: 15832.windowsa@1:2320/105 25e5e83e   
   REPLY: 2:423/39 617f537d   
   PID: Synchronet 3.18c-Linux master/dcb003099 Dec 31 2020 GCC 7.5.0   
   TID: SBBSecho 3.12-Linux master/dcb003099 Dec 31 2020 GCC 7.5.0   
   BBSID: CAPCITY2   
   CHRS: ASCII 1   
   >  MP> generating a separate pair for WinSCP to use.  It appears   
   >  MP> that WinSCP is set up to import key pairs, but only from   
   >  MP> a very narrow group of other packages... Putty and two   
      
   > I am not using WinSCP here, but I needed similar thing recently. I used   
   PuttyG   
   >  to load .key file and then just saved it under .ppk format -> and since then   
   > ing that .ppk   
      
   > Would that be an option?   
      
   Karel,   
   Thank you.  That just might be an option!  I did not even think of running   
   it through a innermediary program first.   
      
   I will have to try it.   
      
   Mike   
      
      
    * SLMR 2.1a * "Mmmmmmmm.....bacon..."   
   --- SBBSecho 3.12-Linux   
    * Origin: capitolcityonline.net * Telnet/SSH:2022/HTTP (1:2320/105)   
   SEEN-BY: 1/123 14/0 15/0 18/200 19/36 90/1 103/705 105/81 106/201   
   SEEN-BY: 116/18 120/302 340 123/131 124/5016 129/305 153/757 7715   
   SEEN-BY: 154/10 203/0 218/700 840 221/0 6 222/2 226/30 227/114 702   
   SEEN-BY: 229/424 426 428 452 664 700 230/150 152 240/1120 5832 249/206   
   SEEN-BY: 249/317 400 250/1 261/38 100 1466 266/512 267/155 275/100   
   SEEN-BY: 280/464 5003 282/1038 1056 291/100 111 292/8125 301/1 317/3   
   SEEN-BY: 320/119 219 322/757 340/400 341/66 234 342/200 396/45 423/120   
   SEEN-BY: 633/267 280 640/1321 1384 712/620 848 770/1 801/161 189 2320/0   
   SEEN-BY: 2320/33 105 195 304 3634/12 5020/1042   
   PATH: 2320/105 261/38 712/848 280/464 153/757 221/6 229/664 426