06-10-15 06:47 TOM WALKER wrote to ED VANCE about Re: SCSI Adapter Startup   
      
    TW> @MSGID: <5578B5BB.14116.windowsa@capcity2.synchro.net>   
    EV> EV>I can't remember if there is another empty slot besides the one I put   
    EV> EV>the SCSI board in.   
    EV> EV>Thanks, I will see what a USB3 card sells for.   
    EV> EV>I only use the External HDD for backing up so it might not be   
    EV> EV>cost-effective for me to get a card.   
    EV> EV>I'll check though. Thanks.   
      
    EV> TW> I have seen PCIe USB-3 cards for as low as $16.00   
      
    EV>16 bucks sounds cheap enough though I feel like I will wait a while on   
    EV>getting a PCIe USB3  card just for a backup drive.   
      
    TW> Here is the card I picked up:   
      
    TW> http://www.newegg.com/Product/Product.aspx?Item=17Z-0002-00002   
      
    TW> Since I wanted a USB-3 connector on the front of the Computer I   
    TW> alos picked this one becasue in addition to the two back panel   
    TW> USB-3 conectors it also has an internal 19 pin USB connector   
    TW> for hooking up a USB-3 Card Reader which I have in the Floppy   
    TW> Drive opening on the computer case.   
      
    TW> Here is the Card Reader I am using:   
      
    TW> http://www.newegg.com/Product/Product.aspx?Item=N82E16820223119   
   Howdy! Tom,   
      
   HP put a card reader in my XP pc but it will only read up to 2GB.   
      
   I use a SDHC to USB2 adapter to read any SDHC cards by inserting it   
   into a USB2 slot on the pc.   
      
   After I bought the XP pc HP sent one BIOS update but the ability to   
   read SDHC cards wasn't in that update.   
      
   Figureing out Work Arounds is part of the computer game, isn't it?   
      
   73   
      
   ... I started out with nothing & have most of it left.   
   --- MultiMail/MS-DOS v0.49   
   --- SBBSecho 2.12-Linux   
    * Origin: telnet & http://cco.ath.cx - Dial-Up: 502-875-8938 (1:2320/105.1)