06-09-15 10:53 Daryl Stout wrote to ALL about SOUND CARD ISSUE   
      
    DS> @MSGID: <55781404.14110.windowsa@capcity2.synchro.net>   
    DS>   While this is a Windows 95 echo, and I'm running XP, I've run   
    DS> into a sound card issue with 2 different ham radio   
    DS> applications...and since there are some fellow hams in here   
    DS> (i.e. Holger and Ed), I thought I'd ask this question.   
   -snip-   
    DS>   It works perfect with the DV Dongle and DV Tools...with the   
    DS> mic on the webcam, and the incoming audio to the headset.   
    DS> However, on Echolink, while the mic on the webcam works, the   
    DS> audio instead goes to the PC Speaker INSTEAD of to the headset.   
    DS> The audio on the headset is the "signals", such as when the   
    DS> connection to the node is made or lost, or a text message is   
    DS> sent...but, the audio of the transmitting station goes through   
    DS> the PC speaker.   
      
    DS>   I've checked the sound settings in the XP Control Panel, and   
    DS> in both the DV Tools program, and in Echolink, and the input   
    DS> and output sources are identical. Yet, the "glitch" still   
    DS> exists, and it's harder to copy audio from the PC speaker, than   
    DS> from the headset mic.   
      
   Here is what I thought up, hope it helps.   
      
      
   If the computer or sound card has a ear phone jack try using that.   
   Or Line Out.   
      
   If it doesn't, unplug the speaker wire from the sound card and plug   
   Your headset in that jack.   
   -snip-   
    DS>   Any help would be appreciated.   
      
   See if Your speakers have a earphone jack.   
      
   73   
      
      
   ... SENILE.COM found . . . Out Of Memory . . .   
   --- MultiMail/MS-DOS v0.49   
   --- SBBSecho 2.12-Linux   
    * Origin: telnet & http://cco.ath.cx - Dial-Up: 502-875-8938 (1:2320/105.1)