05-29-15 07:33 TOM WALKER wrote to HOLGER GRANHOLM about Re: SCSI Adapter   
   Startup   
      
    TW> @MSGID: <5568E3BE.13959.windowsa@capcity2.synchro.net>   
    HG>EV> Is there any place on the internet that You can give me to learn   
    HG>EV> about SCSI stuff?   
      
    HG>EV> Off the top of my head I think the Adapter is made by Advance.   
      
    HG>Maybe the name is Adaptec. I've never heard of SCSI drivers made by   
    HG>Advance. When you buy an Adaptec SCSI controller you also receive three   
    HG>books describing various drivers and uses but I don't recall that there   
    HG>is any SCSI tutorial.   
      
    HG>I know that the SCSI controller you have is a very simple one intended   
    HG>just for a SyQuest drive, not a general purpose controller.   
      
    TW> That was the case for the Adaptec SCSI card that came with my   
    TW> Zip Drive. It was pripority for Zip Drives only.   
   Howdy! Tom,   
      
   The Adapter HP included with their 4c scanner was like the one You used   
   for the ZIP drive.   
      
   I don't think the one I'm using for the SyQuest drive is Plain Jane.   
   73   
      
   ... This is a home for lost taglines.   
   --- MultiMail/MS-DOS v0.49   
   --- SBBSecho 2.12-Linux   
    * Origin: telnet & http://cco.ath.cx - Dial-Up: 502-875-8938 (1:2320/105.1)