On Sun, 19 Apr 2015, Ed Vance wrote to Mark Lewis:   
      
    EV> I was looking on Linksys Support to see if there has been a   
    EV> Firmware Update since the last one they offered, that I installed.   
      
    EV> I have version 1.52.16 on the BEFSX41 Router.   
      
    EV> I noticed on the Support Page it mentions Version 1 and Version 2   
    EV> for my router.   
      
    EV> I looked through the FAQ and read entries in the FORUM but didn't   
    EV> see anything about changing my router to be able to use Version 2   
    EV> Firmware.    
      
   check the stickers on your router... like with motherboard in computers, there   
   are different revisions... if your router is a version 1, then i'd use that   
   firmware... if your router is a version 2, then that...   
      
    EV> The only reference I saw to Version 2 was about BEFSR41 routers. I   
    EV> didn't try to look up the differences in the SR41 and SX41 models,   
    EV> but I would think I shouldn't go by anything written for the SR41.    
      
   correct...   
      
    EV> I thought to ask if I could/should be able to put Version 2   
    EV> Firmware on my router, Thanks!   
      
   what was the firmware that was on it before you updated it last time? but   
   really, though, i think it has to do with the version of the router as to   
   which version of the firmware you can put on it...   
      
    EV> I wrote to You because I think that You would know off the top of   
    EV> Your head the answer, but any one is invited to write replies to my   
    EV> query. Thanks again.   
      
   not a problem... i've seen similar before... that's why i said to look at the   
   stickers and see if you can find the router's version... it made a difference,   
   in my case, of whether or not i had a router or a brick ;)    
      
   )\/(ark   
      
    * Origin:  (1:3634/12)