In a message dated 08-30-14, Ed Vance said to All:   
      
   Hi Ed,   
      
   EV> I used Web Of Trust to read comments about several of the websites   
   EV> in the Results List for the Search but after seeing Negative reviews   
   EV> about the sites I checked on I gave up and thought I'd ask here if   
   EV> anyone knows a Safe website I could get the SCSI Installation   
   EV> software at, for FREE? Thanks In Advance.   
      
   Actually you don't need any special installation software to make that   
   SCSI controlled SyQuest work.   
      
   EV> One of the Floppy Disks I got with my SyQuest EZ135 Parallel Port   
   EV> model is for installing on NT.   
      
   The only thing you need to do is to insert the line   
   "device=c:\xxx\aspidisk.sys" that may be contained among the NT files   
   into your config.sys file and to set the SCSI ID on the drive to 2,3,4,5   
   or 6. The "xxx" means the directory where the aspidisk.sys is.   
      
   The aspidisk.sys can also be loaded high by devicehigh=   
   The SCSI ID is usually set by jumper(s) on the drive.   
      
   EV> My EZFlyer 230 drive is a SCSI model and I don't think any files on   
   EV> the Floppies I got with my Parallel Port device would work with a   
   EV> regular SCSI Drive that is connect to a SCSI card I got with the   
   EV> SCSI drive.   
      
   Any files that are on the floppies will be read by the SCSI connection   
   as soon as the computer is aware of the aspidisk driver.   
      
   If there is a jumper for setting the IRQ of the EzFlyer you can set it   
   to 5 which is the IRQ for LPT2 that you don't use.   
      
   CU AGN, Sam, OH0NC   
      
   aka Holger   
      
   ___   
    * MR/2 2.30 * Wisdom comes with age. But sometimes age comes alone.   
      
      
      
   --- PCBoard (R) v15.22 (OS/2) 2   
    * Origin: Coming to you from the Sunny Aland Islands. (2:20/228)