home bbs files messages ]

Just a sample of the Echomail archive

Cooperative anarchy at its finest, still active today. Darkrealms is the Zone 1 Hub.

   WIN95      Chat about Windows 95, 98, ME systems      13,597 messages   

[   << oldest   |   < older   |   list   |   newer >   |   newest >>   ]

   Message 11,104 of 13,597   
   Ed Vance to All   
   SyQuest EZFlyer 230 DISKS   
   30 Aug 14 01:30:00   
   
   I just made a short Search for the software that comes with a SCSI   
   version of the SyQuest EZFlyer 230 External Removeable Cartridge HDD.   
      
   I used Web Of Trust to read comments about several of the websites   
   in the Results List for the Search but after seeing Negative reviews   
   about the sites I checked on I gave up and thought I'd ask here if   
   anyone knows a Safe website I could get the SCSI Installation software   
   at, for FREE? Thanks In Advance.   
      
   One of the Floppy Disks I got with my SyQuest EZ135 Parallel Port model   
   is for installing on NT.   
   There isn't any files for SCSI that I can see on that disk.   
      
   There are some SCSI files on another of the disks but I think they are   
   made for using the Parallel Port model with a Parallel Port to SCSI   
   Adapter SyQuest sold so I don't think I could use those files to   
   Restore the Backup Sets I made for the C: and D: HDD on the 486 pc.   
      
   My EZFlyer 230 drive is a SCSI model and I don't think any files on   
   the Floppies I got with my Parallel Port device would work with a   
   regular SCSI Drive that is connect to a SCSI card I got with the   
   SCSI drive.   
      
   That drive didn't come with any Floppies, it just came with one EZ135   
   Removeable Cartridge blank disk in the box that I have used to put some   
   files on to check out the drive before I used it to Read the Data off   
   of the Cartridges I had, and it did that job just fine.   
      
   I just would like to be able to Restore what I Backed Up the last time   
   I made one, using DOSBOX.   
      
   Some of the Cartridges I had files on had the files from the DOS and   
   Windows 3.1 directories and I'm sure I could put them in DOSBOX to be   
   able to use SyQuest's Backup and Restore programs after I made a   
   installation using the SCSI software.   
      
   I just had a thought, after sending this message I will look at a Web   
   Site called Archive.com or some such name to see if there are any   
   SyQuest files stored there that I could use.   
      
   ... No, Windows isn't dead . . . it just smells that way.   
   --- MultiMail/MS-DOS v0.49   
   --- SBBSecho 2.12-Linux   
    * Origin: telnet & http://cco.ath.cx - Dial-Up: 502-875-8938 (1:2320/105.1)   

[   << oldest   |   < older   |   list   |   newer >   |   newest >>   ]


(c) 1994,  bbs@darkrealms.ca