|11ÚÄ|03Ä[|15Quoting |12Bob Jones  |15to |12Marty Blankenship |03]ÄÄùúú   
   |11ÀÄ|03Ä[|15Taken from: |13[Fido] Squish Help |03]Äį   
      
   BJ> Interesting....  Results from using Inspecta (mentioned in other recent   
      
   I found this file on the net and ran it and checked out all my archived   
   bundles. It only tells me the node address of the individual pakets inside the   
   archived bundle and doesn't tell me anything about about the archived file at    
   all. Everything inside the bundles checked out correctly with the right node    
   addresses.   
      
   BJ> The only potential glitch with that is that you will need to do some specia   
   BJ> zone definitions for all but the main FTN configuration if you are using   
   BJ> Binkley Style Outbound areas.....  Now, if you aren't using that, then the   
      
   I don't use blinkley style outbound at all, not even squish type. I use normal   
   type outbound that one would use with frontdoor type mailers.   
      
   BJ> Now, if you aren't using that, then the   
   BJ> problem may be one with the interactions between squish and your front end.   
   BJ> Since I run Binkley, and I know there is an option for an alternate style,   
   BJ> that may be where the problem is....   
      
   I don't use a frontend mailer at all. I do all my stuff through Transx, I just   
   have Frontdoor around to use it's Xrobot program for my InterBBS Global War    
   game.   
      
      The GameMaster BBS     Home of Marty's Mercantile, an IGM for L.O.R.D.   
      Also home of Bluenet message network.  Telnet to any of the following.   
    gamemasterbbs.darktech.org  gamemaster.dtdns.net  gamemasterbbs.no-ip.com   
   gamemaster.bbs.us    Lots of InterBBS games available as well as local ones.   
      
   --- Renegade v08-30.5 DOS/EXP   
    * Origin: The GameMaster BBS | gamemasterbbs.darktech.org (1:2320/303)