MSGID: 1:103/705.0 fc682f10   
   TZUTC: -0800   
   REPLY: 1:396/45.0 fc5bd400   
   PID: Synchronet 3.18c-Win32  Nov 30 2020 MSC 1927   
   TID: SBBSecho 3.11-Linux r3.179 Nov 30 2020 GCC 8.3.0   
   COLS: 80   
   NOTE: FSEditor.js v1.104   
   CHRS: IBMPC 2   
   * Copied (from: SYNC_PROGRAMMING) by Marc Lewis using timEd/2 1.10.y2k+.   
      
   If anyone here in TUB echo has any ideas relative to this, please let us know.   
      
   -Marc   
      
     Re: Problem with legacy tosser (Squish) and Sync's MSGID   
     By: Marc Lewis to Rob Swintell on Mon Nov 30 2020 09:35 pm   
      
    > Hello Rob.   
    >   
    > Of late, my old Squish tosser (OS/2) is having an insurmountable problem   
    > with NetMails containing data other than the Node number and the time/date   
    > code. Here is an example:   
    >   
    > -o-o-o-o-o-o-o-o-CUT-o-o-o-o-o-o-o-o-o-   
    > Date : Thu Nov 12, 16:04     25                                    pvt rcv   
    > From : Nigel Reed                                 7205:124/5016   
    > To   : areafix                                    7205:396/45   
    > Subj : xxxxxxxx   
    > ============================================================   
    > =================== =   
    > TZUTC: -0600   
    > MSGID: 7205@1:124/5016 24130381   
    >   
    > -o-o-o-o-o-o-o-o-CUT-o-o-o-o-o-o-o-o-o-   
    >   
    > That apparent message number followed by the @ symbol in the MSGID line   
    > completely throws Squish for a loop as far as the Zone number is   
    > concerned.   
    > Both the from and to address are Zone 1 addresses but for some   
    > reason Squish   
    > cannot fathom the xxxx@ in the MSGID line.   
    >   
    > Is there anything that can be done to correct this? Maybe omitting the   
    > apparent message number or some kind of spacing? I am not any kind of   
    > programmer so I cannot give any suggestions. I can only say that it   
    > is ONLY   
    > messages coming from a Synchronet system that causes this problem and ONLY   
    > when it is NetMail. Echomail is unaffected apparently.   
    >   
    > I am at a complete loss.  Your help will be very much appreciated!   
      
   It sounds like Squish is trying to parse the source address from the MSGID? It   
   definitely should not be doing that. Squish is open source, do you have the   
   means to recompile it if somewhere were to supply a source code fix/patch for   
   it?   
   --    
                                               digital man   
      
   Synchronet "Real Fact" #17:   
   "Vertrauen" (ver-trow-en) translates to "trust" in German, and was a band name.   
   Norco, CA WX: 64.1øF, 20.0% humidity, 2 mph WSW wind, 0.00 inches rain/24hrs   
   --- SBBSecho 3.11-Linux   
    * Origin: Vertrauen - [vert/cvs/bbs].synchro.net (1:103/705)   
   SEEN-BY: 1/123 18/200 19/33 90/1 105/81 106/633 987 120/340 123/131   
   SEEN-BY: 124/5014 5016 130/803 203/0 221/0 226/30 227/114 702 229/101   
   SEEN-BY: 229/424 426 550 664 1016 240/2100 5138 5411 5832 5853 249/206   
   SEEN-BY: 249/317 400 261/38 280/464 5003 292/854 8125 317/3 322/757   
   SEEN-BY: 342/200 387/25 396/45 633/280 2432/390 2454/119   
   PATH: 396/45 280/464 240/5832 229/426