TZUTC: -0700   
   MSGID: 57989.sync_sys@1:103/705 2c7a5fbc   
   REPLY: 57988.sync_sys@1:103/705 2c7a3dc9   
   PID: Synchronet 3.21a-Linux master/273e9a093e Apr 28 2025 GCC 13.3.0   
   TID: SBBSecho 3.24-Linux master/079a19d93 Apr 30 2025 GCC 12.2.0   
   COLS: 80   
   BBSID: DIGDIST   
   CHRS: CP437 2   
   NOTE: SlyEdit 1.89f Beta (2025-04-28) (ICE style)   
     Re: Address already in use   
     By: Xorek to All on Thu May 01 2025 06:03 pm   
      
    Xo> If I save something in scfg while logged into the BBS and then log out   
    Xo> afterward, it appears to trigger the following error:   
      
    Xo> term 0008 !ERROR 98 binding Telnet Server socket to port 23: Address   
    Xo> already in use   
      
   After saving something in SCFG, Synchronet normally recycles its servers in   
   order to pick up the latest configuration.  Sometimes I've noticed that error   
   too. It's like the previous instance of the Synchronet servers don't fully   
   exit before they start again.  I'm running my BBS in Linux, and after saving   
   my configuration, I've been in the habit of doing this, which stops the   
   Synchronet service, waits just over 2 minutes (to allow time for the servers   
   to fully stop), and then starts Synchronet again:   
      
   sudo systemctl stop sbbs;sleep 121;sudo systemctl start sbbs   
      
   ---   
    þ Synchronet þ Digital Distortion: digitaldistortionbbs.com   
    * Origin: Vertrauen - [vert/cvs/bbs].synchro.net (1:103/705)   
   SEEN-BY: 103/13 705 105/81 106/201 124/5016 128/187 153/757 7715 154/10   
   SEEN-BY: 154/30 110 203/0 218/700 221/0 226/30 227/114 229/110 114   
   SEEN-BY: 229/206 317 400 426 428 470 550 700 705 240/1120 5832 263/1   
   SEEN-BY: 266/512 280/464 5003 5006 291/111 292/8125 301/1 320/219   
   SEEN-BY: 322/757 341/66 234 342/200 396/45 423/120 460/58 256 1124   
   SEEN-BY: 467/888 633/280 712/848 770/1 902/26 5020/400 8912 5054/30   
   SEEN-BY: 5075/35   
   PATH: 103/705 280/464 460/58 229/426