TZUTC: -0800   
   MSGID: 56673.sync_sys@1:103/705 2b913d1e   
   PID: Synchronet 3.20a-Linux master/f4a2249b0 Sep 21 202 GCC 12.2.0   
   TID: SBBSecho 3.21-Linux master/9d3a8113d Nov 04 2024 11:37 GCC 12.2.0   
   BBSID: VERT   
   CHRS: ASCII 1   
   https://gitlab.synchro.net/main/sbbs/-/issues/813#note_5904   
      
   Try setserial /dev/ttyUSB1 baud_base 115200   
      
   fwiw, I don't specify the baud rate for the modem, only the direct serial   
   connection, when running sexpots.   
      
   ```   
   root      695252       1  0 Oct18 ttyACM0  03:07:23 /usr/local/bin/sexpots   
   /usr/local/etc/sexpots-line1.ini -syslog=sexpots-line1   
   root      695253       1  0 Oct18 ttyACM1  03:07:03 /usr/local/bin/sexpots   
   /usr/local/etc/sexpots-line2.ini -syslog=sexpots-line2   
   root      695254       1  0 Oct18 ttyACM2  03:06:46 /usr/local/bin/sexpots   
   /usr/local/etc/sexpots-line3.ini -syslog=sexpots-line3   
   root      695255       1  0 Oct18 ttyACM3  03:07:17 /usr/local/bin/sexpots   
   /usr/local/etc/sexpots-line4.ini -syslog=sexpots-line4   
   root      695256       1  0 Oct18 ttyUSB0  03:03:39 /usr/local/bin/sexpots   
   /usr/local/etc/sexpots-local.ini -syslog=sexpots-local -null -baud 9600   
   ```   
      
   Still, maybe bringing the baud_base setting down may help.   
   --- SBBSecho 3.21-Linux   
    * Origin: Vertrauen - [vert/cvs/bbs].synchro.net (1:103/705)   
   SEEN-BY: 1/19 16/0 19/37 80/1 90/1 103/705 105/81 106/201 123/130   
   SEEN-BY: 128/187 142/104 153/7715 154/10 203/0 218/700 221/1 6 360   
   SEEN-BY: 226/30 227/114 229/110 114 206 317 400 426 428 470 550 700   
   SEEN-BY: 229/705 240/1120 5832 266/512 280/464 5003 282/1038 291/111   
   SEEN-BY: 301/1 113 320/119 219 319 2119 322/757 762 326/101 341/66   
   SEEN-BY: 342/200 396/45 423/81 460/58 633/280 712/848 5020/1042 5075/35   
   PATH: 103/705 301/1 221/1 320/219 229/426