TZUTC: -0800   
   MSGID: 56671.sync_sys@1:103/705 2b9120d9   
   PID: Synchronet 3.20a-Linux master/f4a2249b0 Sep 21 202 GCC 12.2.0   
   TID: SBBSecho 3.21-Linux master/9d3a8113d Nov 04 2024 11:37 GCC 12.2.0   
   BBSID: VERT   
   CHRS: ASCII 1   
   https://gitlab.synchro.net/main/sbbs/-/issues/813#note_5902   
      
   Yeah, I have another USR modem for answering PPP calls which is ttyUSB0.    
      
   There are switches on the modem, however none of them are for changing flow   
   control settings. There *are* however settings accessible by AT commands for   
   that, which I have not tried changing. That being said, the modem used for PPP   
   calls is using the same model of USB to serial adapter and is a very very   
   similar modem to the one I'm using for sexpots, and the software for answering   
   that modem does just fine with hardware flow control. I've copied all the   
   settings over one-by-one and even tried swapping the two modems to no avail.   
      
   How would I change the Baud_base setting?   
   --- SBBSecho 3.21-Linux   
    * Origin: Vertrauen - [vert/cvs/bbs].synchro.net (1:103/705)   
   SEEN-BY: 90/1 103/705 105/81 106/201 124/5016 128/187 153/757 7715   
   SEEN-BY: 154/10 30 203/0 218/700 221/0 226/30 227/114 229/110 114   
   SEEN-BY: 229/206 317 400 426 428 470 550 700 705 240/1120 5832 266/512   
   SEEN-BY: 280/464 5003 5006 282/1038 291/111 292/8125 301/1 320/219   
   SEEN-BY: 322/757 341/66 234 342/200 396/45 423/120 460/58 256 1124   
   SEEN-BY: 467/888 633/280 712/848 770/1 5020/400 8912 5054/30 5075/35   
   PATH: 103/705 280/464 460/58 229/426