TZUTC: -0800   
   MSGID: 56656.sync_sys@1:103/705 2b90d43e   
   PID: Synchronet 3.20a-Linux master/f4a2249b0 Sep 21 202 GCC 12.2.0   
   TID: SBBSecho 3.21-Linux master/9d3a8113d Nov 04 2024 11:37 GCC 12.2.0   
   BBSID: VERT   
   CHRS: ASCII 1   
   https://gitlab.synchro.net/main/sbbs/-/issues/813#note_5892   
      
   With the BaudRate line commented it shows 0 bps (as expected) but still   
   doesn't achieve communication with the modem.    
   The output of that command is as follows:   
   ```   
   speed 0 baud; rows 0; columns 0; line = 0;   
   intr = ^C; quit = ^\; erase = ^?; kill = ^U; eof = ^D; eol = ; eol2 =   
   ; swtch = ; start = ^Q; stop = ^S; susp = ^Z; rprnt = ^R; werase   
   = ^W; lnext = ^V; discard = ^O; min = 1; time = 0;   
   -parenb -parodd -cmspar cs8 hupcl -cstopb cread clocal crtscts   
   ignbrk -brkint ignpar -parmrk -inpck -istrip -inlcr -igncr -icrnl -ixon -ixoff   
   -iuclc -ixany -imaxbel -iutf8   
   -opost -olcuc -ocrnl -onlcr -onocr -onlret -ofill -ofdel nl0 cr0 tab0 bs0 vt0   
   ff0   
   -isig -icanon -iexten -echo -echoe -echok -echonl -noflsh -xcase -tostop   
   -echoprt -echoctl -echoke -flusho -extproc   
   ```   
   --- SBBSecho 3.21-Linux   
    * Origin: Vertrauen - [vert/cvs/bbs].synchro.net (1:103/705)   
   SEEN-BY: 10/0 1 90/1 102/401 103/1 17 705 105/81 106/201 124/5016   
   SEEN-BY: 128/187 153/7715 214/22 218/0 1 215 601 700 720 840 860 870   
   SEEN-BY: 218/880 930 226/30 227/114 229/110 114 206 317 400 426 428   
   SEEN-BY: 229/470 550 700 705 266/512 280/464 282/1038 291/111 301/1   
   SEEN-BY: 320/219 322/757 342/200 396/45 460/58 633/280 712/848 5075/35   
   PATH: 103/705 218/700 229/426