TZUTC: 0000   
   MSGID: 54592.sync@1:103/705 2cddf297   
   PID: Synchronet 3.21a-Linux master/05e4146d5 Jul 02 2025 GCC 12.2.0   
   TID: SBBSecho 3.29-Linux master/6d0371950 Jul 15 2025 GCC 12.2.0   
   BBSID: FUNTOPIA   
   CHRS: CP437 2   
   FORMAT: flowed   
     Re: How to Quote in Syncterm?   
     By: Digital Man to Mindsurfer on Wed Jul 16 2025 09:48:29   
      
    DM> Where are you finding Ctrl-Q is a command key for quoting a message?   
   i use curses video mode. there you have Ctrl-Q for disconnect   
   Editor is the Slyedit IceStyle. when i switch to X11 video mode in syncterm   
   program settings i don't have Ctrl-Q collision anymore.   
   I had this issue forever and always used a second terminal beside syncterm   
   because of that.   
      
   Regards,   
   Mindsurfer   
      
   PS: Here is the syncterm manual part about that:   
      
   "When you are connected to a system, there are a number of controls available   
   that are not sent to the remote.   
      
   For Curses and ANSI modes, only two controls are avilable, and they are not   
   available in other modes. This is because these two modes dont have access to   
   keys that could not potentially be sent to the remote. To help avoid conflict   
   with remote systems, the XON (Ctrl+Q) and XOFF (Ctrl+S) codes that are used   
   for software flow control are used.   
      
   Ctrl+Q   
   Disconnects from the current session.   
      
   Ctrl+S   
   Brings up the Online Menu (see below)"   
      
   ---   
    þ Synchronet þ FuNToPiA BBS - telnet://funtopia.telnetbbs.de:3023   
    * Origin: Vertrauen - [vert/cvs/bbs].synchro.net (1:103/705)   
   SEEN-BY: 10/0 1 102/401 103/1 17 705 105/81 106/201 124/5016 128/187   
   SEEN-BY: 129/14 153/7715 154/110 218/0 1 215 601 610 700 840 860 880   
   SEEN-BY: 226/30 227/114 229/110 206 317 400 426 428 550 700 705 266/512   
   SEEN-BY: 280/464 291/111 301/1 320/219 322/757 342/200 396/45 460/58   
   SEEN-BY: 633/280 712/848 902/26 5075/35   
   PATH: 103/705 218/700 229/426