TZUTC: -0500   
   MSGID: 53812.sync@1:103/705 2c3592b3   
   REPLY: 53795.sync@1:103/705 2c33b45a   
   PID: Synchronet 3.20e-Linux master/4f2886fce Mar 08 2025 GCC 14.2.0   
   TID: SBBSecho 3.23-Linux master/cc717b402 Mar 08 2025 GCC 12.2.0   
   BBSID: PALANTIR   
   CHRS: CP437 2   
   NOTE: FSEditor.js v1.105   
     Re: Re: [wiki.synchro.net] page added: howto:freq   
     By: Gamgee to Digital Man on Sun Mar 09 2025 09:20 am   
      
    > Another quick followup to this...  Again there is no prefix for the file   
    > library, and I did use an exact filename, with no change.   
    >   
    > I also tried using the OS-level directory path instead of the Internal Code,   
    > and that didn't work.   
    >   
    > Below is a log snip of what I see in sbbs.log when the FREQ comes in.  The   
    > entries before and after this snip are just the session start/stop messages,   
    > no other useful information is seen.  I also snipped the timestamp at the   
    > beginning of each line for readability:   
    >   
    > srvc 0013 BINKP Receiving file: /sbbs/temp/00870073.req (0.0KB)   
    > srvc 0013 BINKP Received file: /sbbs/temp/00870073.req (0.0KB)   
    > srvc 0013 BINKP Deleted file: /sbbs/temp/00870073.req   
    > srvc 0013 BINKP Receiving file: /sbbs/temp/nfx4kkji.req (0.0KB)   
    > srvc 0013 BINKP Received file: /sbbs/temp/nfx4kkji.req (0.0KB)   
    > srvc 0013 BINKP Deleted file: /sbbs/temp/nfx4kkji.req   
      
    > It is interesting that there are *TWO* .req messages sent with each try, not   
    > sure why that is.  I did try another experiment though - I FREQ'd a file   
    > from a non-SBBS system, and it also sent two .req's to that system, but I   
    > got back the file I requested, and two netmail replies with the file   
    > information.   
    >   
    > What I notice about the log info above is that there is no "recognition" by   
    > BinkIT that there is a request being made.  No error message like "file not   
    > found" or anything else.  Just what you see above.  It's like the FREQ   
    > function is not enabled in BinkIT or something.   
    >   
    > Hopefully this gives some clues about what might be happening.  Also, just   
    > for completeness, on the requesting system I have tried sending to   
    > "freq@
" and to "sysop@
" with no difference (probably   
    > doesn't matter who it's addressed to).  Also have used "FR: ALLFILES" and   
    > "FR:ALLFILES" on the subject line, with no difference.   
      
   Digital Man, any more thoughts on this?  It seems like BinkIT is not   
   recognizing that there is an inbound ".req" netmail, and doesn't trigger the   
   FreqIT function.   
      
   I looked at freqit.js and see that it "loads" fidocfg.js and fre   
   it_common.js.  That second one requires filebase.js, and in that last one I   
   see a comment reference regarding an "unnecessary shim for the new Filebase   
   class".  Just a wild guess, but did the new 3.20 filebase break something?   
      
   For anyone else reading this, does ANYONE running SBBS (with BinkIT) have a   
   working FREQ function that could maybe share some setup/config info?   
      
   Thanks in advance!   
      
   ---   
    þ Synchronet þ Palantir BBS * palantirbbs.ddns.net * Pensacola, FL   
    * Origin: Vertrauen - [vert/cvs/bbs].synchro.net (1:103/705)   
   SEEN-BY: 4/0 88/0 90/0 93/1 103/705 105/81 106/201 124/5016 128/187   
   SEEN-BY: 153/757 7715 154/10 30 110 203/0 218/700 221/0 6 226/30 227/114   
   SEEN-BY: 229/110 114 206 317 400 426 428 470 550 700 705 240/1120   
   SEEN-BY: 240/5832 266/512 280/464 5003 5006 291/111 292/8125 301/1   
   SEEN-BY: 310/31 320/219 322/757 341/66 200 234 342/200 396/45 423/120   
   SEEN-BY: 460/58 467/888 633/280 712/848 770/1 900/0 102 106 902/0   
   SEEN-BY: 902/19 26 905/0 5019/40 5020/400 5075/35   
   PATH: 103/705 280/464 341/66 902/26 229/426