TZUTC: -0600   
   MSGID: 53620.sync@1:103/705 2c0a401f   
   REPLY: 1:154/110 e8756309   
   PID: Synchronet 3.20c-Linux master/444fecaf4 Jan 12 2025 GCC 14.2.0   
   TID: SBBSecho 3.23-Linux master/36f4eb6af Feb 05 2025 GCC 12.2.0   
   BBSID: PALANTIR   
   CHRS: CP437 2   
   -=> Richard Vonzel wrote to Digital Man <=-   
      
    DM> This is a frequently asked question and the cause is usually that 5D   
    DM> addressing was used in either tickit.cfg or sbbsecho.ini and not in the   
    DM> other. Try adding or removing the domain part of the FTN address from   
    DM> one or the other configuration (i.e. 1:103/705@fidonet is not the same   
    DM> address as 1:103/705).   
      
    RV>     I'll give that a try. I don't have tickit.cfg file though, bit in   
    RV> the sbbsecho.ini the uplinks are in 5D format.   
      
   Your tickit config is contained in ../ctrl/tickit.ini   
      
   Please note the warning in there that you must define *EITHER* a "Dir"    
   or a "Path" keyword for each connected file area, but *NOT* both.  Very    
   common config error...   
      
   Also double-verify that you have a TIC password defined in the uplink    
   node's configuration block in sbbsecho.ini   
      
      
      
   ... HAL 9000 - Dave. Put down those Windows disks. Please, Dave.   
   --- MultiMail/Linux v0.52   
    þ Synchronet þ Palantir BBS * palantirbbs.ddns.net * Pensacola, FL   
    * Origin: Vertrauen - [vert/cvs/bbs].synchro.net (1:103/705)   
   SEEN-BY: 103/705 105/81 106/201 124/5016 128/187 153/757 7715 154/10   
   SEEN-BY: 154/30 110 203/0 218/700 221/0 226/30 227/114 229/110 114   
   SEEN-BY: 229/206 317 400 426 428 470 550 700 705 240/1120 5832 266/512   
   SEEN-BY: 280/464 5003 5006 291/111 292/8125 301/1 310/31 320/219 322/757   
   SEEN-BY: 341/66 234 342/200 396/45 423/120 460/58 256 1124 467/888   
   SEEN-BY: 633/280 712/848 770/1 902/26 5020/400 5054/30 5075/35   
   PATH: 103/705 280/464 460/58 229/426