TZUTC: -0800   
   MSGID: 53619.sync@1:103/705 2c09ea0e   
   REPLY: 1:154/110 e8756309   
   PID: Synchronet 3.20c-Win32 master/75457d29d Feb 05 2025 MSC 1942   
   TID: SBBSecho 3.23-Linux master/9fd4ae6c6 Feb 05 2025 GCC 12.2.0   
   COLS: 80   
   BBSID: VERT   
   CHRS: CP437 2   
   NOTE: FSEditor.js v1.105   
     Re: Re: TicFilePwd problem   
     By: Richard Vonzel to Digital Man on Wed Feb 05 2025 03:26 pm   
      
    >  DM> This is a frequently asked question and the cause is usually that 5D   
    >  DM> addressing was used in either tickit.cfg or sbbsecho.ini and not in the   
    >  DM> other. Try adding or removing the domain part of the FTN address from   
    >  DM> one or the other configuration (i.e. 1:103/705@fidonet is not the same   
    >  DM> address as 1:103/705).   
    >   
    >     I'll give that a try. I don't have tickit.cfg file though, bit in the   
    > sbbsecho.ini the uplinks are in 5D format.   
      
   Sorry, correction: tickit.ini   
   --    
                                               digital man (rob)   
      
   This Is Spinal Tap quote #38:   
   Artie Fufkin:  I'm not asking, I'm telling with this. Kick my ass.   
   Norco, CA WX: 64.6øF, 73.0% humidity, 0 mph SW wind, 0.01 inches rain/24hrs   
   --- SBBSecho 3.23-Linux   
    * Origin: Vertrauen - [vert/cvs/bbs].synchro.net (1:103/705)   
   SEEN-BY: 103/705 105/81 106/201 124/5016 128/187 153/757 7715 154/10   
   SEEN-BY: 154/30 110 203/0 218/700 221/0 226/30 227/114 229/110 114   
   SEEN-BY: 229/206 317 400 426 428 470 550 700 705 240/1120 5832 266/512   
   SEEN-BY: 280/464 5003 5006 291/111 292/8125 301/1 310/31 320/219 322/757   
   SEEN-BY: 341/66 234 342/200 396/45 423/120 460/58 256 1124 467/888   
   SEEN-BY: 633/280 712/848 770/1 902/26 5020/400 5054/30 5075/35   
   PATH: 103/705 280/464 460/58 229/426