TZUTC: 0000   
   MSGID: 52939.sync@1:103/705 2b9cf380   
   REPLY: 48364.sync@1:103/705 27a7fe68   
   PID: Synchronet 3.20a-Linux master/fd4bd05d6 Nov 14 202 GCC 12.2.0   
   TID: SBBSecho 3.22-Linux master/fd4bd05d6 Nov 14 2024 22:40 GCC 12.2.0   
   BBSID: VERT   
   CHRS: CP437 2   
   From Newsgroup: alt.bbs.synchronet   
      
   + User FidoNet address: 1:229/317   
   AREA:ALT-BBS-SYNCHRONET   
      
   On 08 Oct 2022, Charles Blackburn said the following...   
       
    CB> From: "Charles Blackburn"    
    CB>    
    CB> Hi ALL    
    CB>     
    CB> im struggling getting some SIP dialups going. sometimes they work, but   
    CB> most often they dont.    
    CB>     
    CB> for example....    
    CB>     
    CB> I have two USR 56k Sportsters on a grandstream SIP thingy,     
    CB>    
    CB> one minute i'll connect fine  and then the next time i get something   
    CB> like the following:    
    CB>     
    CB> CONNECT 24000/V34/NONE    
    CB> Ü]êC                       ìs    
    CB>     
    CB> **** BUNCH OF OTHER GARBAGE TILL I HANG UP **   
    CB>    
    CB>    
    CB> other times it will work and i get to the login prompt and it will just   
    CB> "hang"   
    CB>    
    CB>    
    CB> i've even just tried tying minicom to mini com as far as software goes,   
    CB> and it's the same.   
    CB>    
    CB> i'm sure it has something to do with either the init strings or (most   
    CB> likely) the grandstream.   
    CB>    
    CB>    
    CB> i'm just at a loss. I havent figured out a way to force a specific DTE   
    CB> speed (57k6 or 115k2) and also a way to force it not to do compression   
    CB> or error correction. Ideally i want to be able to have a max connect at   
    CB> 57600 and no v92, v44 et al   
    CB>    
    CB> anyone got any thoughts (other than pay for a bunch of real pots lines)   
    CB> LOL   
    CB>    
    CB> regards   
    CB>    
    CB> Charles Blackburn   
      
   Hi Charles,    
      
   Did you ever get your USR 56k to connect via your SIP setup?    
      
   I'm looking for info how to get my modems to connect togther.    
      
   I have a cisco ata spa122 and I'm using asterisk and freepbx (front end).    
   I have two extensions and they each can call and detect rings but never   
   connect.   
      
   I'm using pjsip (not legacy).   
      
   Someone has to have found the solution to this issue with modems over a VOIP   
   system.    
      
   .. The only place I want data loss is on my credit card!   
   --   
   +++++++++++++++++++++++++++++++++++++++++++++++++++++++   
   + The FidoNet News Gate (Huntsville, AL - USA)        +   
   + The views of this user are strictly his or her own. +   
   +++++++++++++++++++++++++++++++++++++++++++++++++++++++   
      
   ---   
   This email has been checked for viruses by Avast antivirus software.   
   https://www.avast.com/antivirus   
      
   --- Synchronet 3.20a-Linux NewsLink 1.2   
    * Origin: Vertrauen - [vert/cvs/bbs].synchro.net (1:103/705)   
   SEEN-BY: 103/705 105/81 106/201 124/5016 128/187 153/757 7715 154/10   
   SEEN-BY: 154/30 203/0 218/700 221/0 226/30 227/114 229/110 114 206   
   SEEN-BY: 229/317 400 426 427 428 470 550 700 705 240/1120 5832 266/512   
   SEEN-BY: 280/464 5003 5006 282/1038 291/111 292/8125 301/1 310/31   
   SEEN-BY: 320/219 322/757 341/66 234 342/200 396/45 423/120 460/58   
   SEEN-BY: 460/256 1124 467/888 633/280 712/848 770/1 5020/400 5054/30   
   SEEN-BY: 5075/35   
   PATH: 103/705 280/464 460/58 229/426