TZUTC: -0400   
   MSGID: 176.fidorenegade@1:322/757 26b20567   
   REPLY: 1:129/305 55441e93   
   PID: Synchronet 3.18b-Win32  Sep 20 2020 MSC 1927   
   TID: SBBSecho 3.11-Win32 r3.177 Sep 20 2020 MSC 1927   
   CHRS: ASCII 1   
    > JH> So I am putzing with my Renegade message base set up and reading docs   
    > JH> abou setting up Metronet with Gecho and Renemail. What is really missing   
    > JH> from t documentation is setting up a separate conference for Metronet,   
    > JH> especially would eventually have several FTN type message bases. Is   
    > JH> there something definitive to read to help with this? I believe it's the   
    > JH> place to start in circumstance. Thank you for any input in advance.    
      
    > Just go into the conference editor and create a conference (say M for   
    > MetroNet), then for the access fields on each base have the access as CA|CM   
    > if you had a conference setup for ALL as confernce A that is.  If not, the   
    > access would just be CM.   
      
   Yes but... the elephant in the room is that there is no option for a conference   
   change in the stock menu :O  Therefore I am going back to the beginning here in   
   the basic Renegade setup.   
   --- SBBSecho 3.11-Win32   
    * Origin:  (1:322/757)   
   SEEN-BY: 1/123 15/0 90/1 105/81 106/201 120/340 123/131 129/305 330   
   SEEN-BY: 129/331 153/7715 218/700 226/30 227/114 229/110 206 317 400   
   SEEN-BY: 229/424 426 428 550 664 700 240/5832 266/512 282/1038 301/1   
   SEEN-BY: 317/3 320/219 322/757 342/200 396/45 460/58 633/280 712/848   
   PATH: 322/757 229/426