MSGID:  65e30c4b   
   REPLY: <10kj75s$3ktp5$2@dont-email.me> c2e02a16   
   PID: PyGate 1.5.2   
   TID: PyGate/Linux 1.5.2   
   CHRS: ASCII 1   
   TZUTC: 0200   
   REPLYADDR anssi.saari@usenet.mail.kapsi.fi   
   REPLYTO 3:633/10 UUCP   
   The Natural Philosopher  writes:   
      
   > 4: nm-bridge:  mtu 9000 qdisc noqueue   
   > state UP mode DEFAULT group default qlen 1000   
   >     link/ether d8:3a:dd:85:22:b1 brd ff:ff:ff:ff:ff:ff   
      
   Hmm, mtu 9000 on the bridge? That means jumbo frames and your   
   performance issue might be because something chokes on them. Your router   
   or whatever is in the other end. So try setting it to 1500 in your   
   chosen config tool.   
      
   --- PyGate Linux v1.5.2   
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)   
   SEEN-BY: 105/81 106/201 128/187 129/14 305 153/7715 154/110 218/700   
   SEEN-BY: 226/30 227/114 229/110 112 134 200 206 300 317 400 426 428   
   SEEN-BY: 229/470 616 664 700 705 266/512 291/111 292/854 320/219 322/757   
   SEEN-BY: 342/200 396/45 460/58 633/10 280 414 418 420 422 509 2744   
   SEEN-BY: 712/848 770/1 902/26 2320/105 5020/400 5075/35   
   PATH: 633/10 280 229/426