MSGID: <10k2mcn$29ube$2@dont-email.me> e3d0de12   
   REPLY:  02f9e4ff   
   PID: PyGate 1.5.2   
   TID: PyGate/Linux 1.5.2   
   CHRS: ASCII 1   
   TZUTC: 0000   
   REPLYADDR tnp@invalid.invalid   
   REPLYTO 3:633/10 UUCP   
   On 11/01/2026 22:37, David Higton wrote:   
   > In message <10k0tjd$4hee$5@dont-email.me>   
   >            The Natural Philosopher  wrote:   
   >    
   >> On 11/01/2026 14:40, David Higton wrote:   
   >>   
   >>>   I installed OpenWRT on an RPi4 a few weeks ago,   
   >>> and it was very successful as an AP, although the need for it didn't last   
   >>> long (my son installed a new mesh network, which gave whole house   
   >>> coverage).  Note that the RPi4 only does one wifi band; I don't know the   
   >>> RPi5.   
   >>>   
   >> I dont want to go that far and replace existing DHCP allocation etc.   
   >    
   > You would set it up as an access point, not as a router.  It would not   
   > need to have DHCP running.  DCHP traffic would go to and from your   
   > existing router; the RasPi AP would just pass it through in both   
   > directions.   
   >    
   Sigh, eggs, grandmother.   
      
   That is why one of the solutions posted was rejected. It didnt do that.   
      
   > David   
      
   --    
   In todays liberal progressive conflict-free education system, everyone    
   gets full Marx.   
      
      
   --- PyGate Linux v1.5.2   
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)   
   SEEN-BY: 105/81 106/201 128/187 129/14 305 153/7715 154/110 218/700   
   SEEN-BY: 226/30 227/114 229/110 112 134 200 206 275 300 317 400 426   
   SEEN-BY: 229/428 470 616 664 700 705 266/512 291/111 292/854 320/219   
   SEEN-BY: 322/757 342/200 396/45 460/58 633/10 280 414 418 420 422   
   SEEN-BY: 633/509 2744 712/848 770/1 902/26 2320/105 5020/400 5075/35   
   PATH: 633/10 280 229/426