MSGID: bb1e57f6
REPLY: <10k06pm$3qvn9$25@dont-email.me> 7685a4dd
PID: PyGate 1.5.2
TID: PyGate/Linux 1.5.2
CHRS: ASCII 1
TZUTC: 0000
REPLYADDR dave@davehigton.me.uk
REPLYTO 3:633/10 UUCP
In message <10k06pm$3qvn9$25@dont-email.me>
The Natural Philosopher wrote:
> Situation: I have one ethernet port in a room near the TV and would like
> to make the smart TV not a TV so to speak, and instead drive it from a Pi
> 5 as a HDMI screen and use the Pi for any or all smart capabilities.
>
> But I also need wifi access to the network in that room as well, and the
> pi 5 comes with wifi,
>
> But I have never seen it configured as a *bridge* to the network and DHCP
> server via the Ethernet.
>
> Does anyone have a link to a magic spell book for this configuration?
If I've understood correctly, turning the RPi into an access point would
do half of what you want. I installed OpenWRT on an RPi4 a few weeks ago,
and it was very successful as an AP, although the need for it didn't last
long (my son installed a new mesh network, which gave whole house
coverage). Note that the RPi4 only does one wifi band; I don't know the
RPi5.
I'm not an expert on OpenWRT, so you'll need to web search for information.
As for the other half of what you want, there might be enough processing
power left over. You haven't given us any detail of what you want to do
in that regard.
David
--- PyGate Linux v1.5.2
* Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
SEEN-BY: 105/81 106/201 128/187 129/14 305 153/7715 154/110 218/700
SEEN-BY: 226/30 227/114 229/110 112 134 200 206 275 300 317 400 426
SEEN-BY: 229/428 470 616 664 700 705 266/512 291/111 292/854 320/219
SEEN-BY: 322/757 342/200 396/45 460/58 633/10 280 414 418 420 422
SEEN-BY: 633/509 2744 712/848 770/1 902/26 2320/105 5020/400 5075/35
PATH: 633/10 280 229/426
|
