MSGID: <10ipai0$39s0k$1@dont-email.me> 19b61e98   
   REPLY: <10ip7qv$3l5g7$2@dont-email.me> 412302ca   
   PID: PyGate 1.5.2   
   TID: PyGate/Linux 1.5.2   
   CHRS: CP437 2   
   TZUTC: 0000   
   REPLYADDR jrwalliker@gmail.com   
   REPLYTO 3:633/10 UUCP   
   On 27/12/2025 18:17, The Natural Philosopher wrote:   
   > On 27/12/2025 17:34, Jim Diamond wrote:   
   >> Has anyone here seen this, and, if so, know what grievous sins I have   
   >> committed to make this happen?ÿ And how to make it stop?   
   >    
   > For years my main *86 server would register itself with DHCP first, then    
   > manually set its IP address to something else.   
   >    
   > In the end I plugged in a screen and used the GUI and net manager to    
   > sort it all out, and it stayed sorted out.   
   >    
   > The problem is that there have been so many ways to set up IP over the    
   > last few years that any online guidance has at best a 25% chance of    
   > doing it the way the distro thinks it ought to be done,   
      
   Did the Pi itself think that it had two addresses on the WiFi interface   
   or was it your router / dhcp server that had two records?   
      
      
   --- PyGate Linux v1.5.2   
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)   
   SEEN-BY: 105/81 106/201 128/187 129/14 305 153/7715 154/110 218/700   
   SEEN-BY: 226/30 227/114 229/110 112 134 200 206 300 317 400 426 428   
   SEEN-BY: 229/470 616 664 700 705 266/512 291/111 292/854 320/219 322/757   
   SEEN-BY: 342/200 396/45 460/58 633/10 280 414 418 420 422 509 2744   
   SEEN-BY: 712/848 770/1 902/26 2320/105 5020/400 5075/35   
   PATH: 633/10 280 229/426