MSGID: <10iibc6$1j3l0$5@dont-email.me> fcac897d
REPLY: 52b085fa
PID: PyGate 1.5.2
TID: PyGate/Linux 1.5.2
CHRS: ASCII 1
TZUTC: 0000
REPLYADDR tnp@invalid.invalid
REPLYTO 3:633/10 UUCP
On 25/12/2025 03:25, Robert Riches wrote:
> On 2025-12-24, mm0fmf wrote:
>> On 11/12/2025 21:18, Carlos E.R. wrote:
>>> Home made with a box of Pringles. just google for "pringles wifi antenna".
>>
>> Also Google cutoff frequency and see that the Pringle tube is too small
>> in diameter to be effective at 2.4GHz.
>>
>> Of course, designs on the internet do not have to follow the laws of
>> physics! :-)
>
> If you need a different diameter and know what diameter you need,
> any decent hardware store or home improvement big-box store in
> the US and perhaps elsewhere will have a wide assortment of sizes
> of PVC, ABS, and metal pipes and round conduits. Some adhesive
> and copper foil would seem likely to be useful for making the
> plastic types useable.
>
If I felt that a design of any sort could be connected to a Pi Pico W I
would 3D print it.
But in the end the simpler approach was to create a wifi point higher up.
Signal strength varies wildly, but enough transmissions get through...
--
"Strange as it seems, no amount of learning can cure stupidity, and
higher education positively fortifies it."
- Stephen Vizinczey
--- PyGate Linux v1.5.2
* Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
SEEN-BY: 105/81 106/201 128/187 129/14 305 153/7715 154/110 218/700
SEEN-BY: 226/30 227/114 229/110 112 134 200 206 300 317 400 426 428
SEEN-BY: 229/470 616 664 700 705 266/512 291/111 292/854 320/219 322/757
SEEN-BY: 342/200 396/45 460/58 633/10 280 414 418 420 422 509 2744
SEEN-BY: 712/848 770/1 902/26 2320/105 5020/400 5075/35
PATH: 633/10 280 229/426
|
