MSGID:  fbf254e3   
   PID: PyGate 1.0   
   TID: PyGate/Linux 1.0   
   CHRS: ASCII 1   
   TZUTC: 1100   
   REPLYADDR zsd@jdvb.ca   
   REPLYTO 3:633/10 UUCP   
   I recently upgraded (?) an RPi4 to the latest and greatest (?) Raspberry Pi   
   OS, which is based upon Debian 13.1 (Trixie).  I have been using a program   
   called "radoneye" (https://github.com/sormy/radoneye) to monitor a Radoneye   
   RD200 detector.   
      
   Now when I get the software to talk to the RD200 (via Bluetooth), it often   
   times out and spits out 50 or so lines of whinage.  Sometimes the whinage   
   is after the desired output, sometimes there is no useful output at all.   
      
   I can still use an RPi4 running the previous version of Raspberry Pi OS to   
   access the RD200 (with this radoneye software), so I know the device is   
   still working.   
      
   I don't know whether this is an issue with the newer Python (3.13.5   
   vs. 3.11.2), with the Bluetooth implementation in Trixie, the software has   
   a bug which wasn't an apparent bug in Python 3.11.2, or something else yet.   
      
      
   My question (and I do have one): is there anyone here using Bluetooth via   
   Python3 on an RPi who can comment on whether all is good for them on Trixie?   
      
   (FWIW, this software is not using bluepy.)   
      
   Thanks.   
                                   Jim   
      
   --- PyGate Linux v1.0   
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)   
   SEEN-BY: 105/81 106/201 128/187 129/14 305 153/7715 154/110 218/700   
   SEEN-BY: 226/30 227/114 229/110 111 200 206 275 300 317 400 426 428   
   SEEN-BY: 229/470 616 664 700 705 266/512 291/111 292/854 320/219 322/757   
   SEEN-BY: 342/200 396/45 460/58 633/10 280 414 418 420 422 509 2744   
   SEEN-BY: 712/848 770/1 902/26 2320/105 5020/400 5075/35   
   PATH: 633/10 280 229/426