home bbs files messages ]

Just a sample of the Echomail archive

Cooperative anarchy at its finest, still active today. Darkrealms is the Zone 1 Hub.

   RBERRYPI      Support for the Raspberry Pi device      21,939 messages   

[   << oldest   |   < older   |   list   |   newer >   |   newest >>   ]

   Message 21,347 of 21,939   
   Mike Scott to Andrew Smallshaw   
   Re: latching relays   
   11 Feb 25 15:19:57   
   
   INTL 3:770/1 3:770/3   
   REPLYADDR usenet.16@scottsonline.org.uk.invalid   
   REPLYTO 3:770/3.0 UUCP   
   MSGID:  fc56a665   
   REPLY:  9b94e192   
   PID: SoupGate-Win32 v1.05   
   On 10/02/2025 23:42, Andrew Smallshaw wrote:   
   > On 2025-02-10, Mike Scott  wrote:   
   >>   
   >> Thanks for the reply. I was considering complete units (like eg url   
   >> below (*)), which differ in operation. They take a pulse on a single   
   >> logic-level input, and flip-flop between states: my query is how to   
   >> reset from a random state to the power-up state.   
   >>   
   >> The one you reference uses either reverse polarity or a 2nd coil to flip   
   >> and flop.   
   >   
   > [ https://www.amazon.co.uk/dp/B08LCTTR4Z/ ]   
   >   
   > Those are not conventional latching relays but standard one with   
   > an external latching circuit.  The semantics oare defiferent.   
   > latching relays use two coildand don't need power to maintain their   
   > state.  The page tells you all you need to know, namely the relay   
   > is not energised when power is first applied, so conductivity is   
   > between NCx and COMx, switching to NOx and COMx on the first pulse.   
      
   OK, I get it. I'm after something that'll retain the same setting for   
   extended periods, hence the desire for a latching relay to keep power   
   dissipation down. Indeed, it does look as though what I've been looking   
   at is a normal relay plus a flip-flop - not what I want, and I think   
   you've saved me from a bad mistake.   
      
   Not wanting to mess with relay driver circuitry, I've found something   
   that's definitely latching at PiHut (I hope!!). Pricey, but complete   
   modules don't seem available otherwise.   
      
   Thanks to all for commenting.   
   >   
   > Lack of proper data sheets is one of the reasons I'm not generally   
   > a fan of commercial building block modules like this.   
   >   
      
      
   --   
   Mike Scott   
   Harlow, England   
      
   --- SoupGate-Win32 v1.05   
    * Origin: Agency HUB, Dunedin - New Zealand | Fido<>Usenet Gateway (3:770/3)   
   SEEN-BY: 19/38 105/81 106/201 128/187 129/305 153/757 7715 154/110   
   SEEN-BY: 218/700 840 220/70 226/17 30 100 227/114 229/110 111 114   
   SEEN-BY: 229/200 206 275 300 317 400 426 428 470 550 616 664 700 705   
   SEEN-BY: 266/512 267/800 291/111 292/854 310/31 320/219 322/757 342/200   
   SEEN-BY: 396/45 460/58 633/280 281 418 420 509 2744 712/848 770/1   
   SEEN-BY: 770/3 100 330 340 772/210 220 230 902/26 2320/105 5020/400   
   SEEN-BY: 5075/35   
   PATH: 770/3 1 633/280 229/426   
      

[   << oldest   |   < older   |   list   |   newer >   |   newest >>   ]


(c) 1994,  bbs@darkrealms.ca