INTL 3:770/1 3:770/3   
   REPLYADDR usenet.16@scottsonline.org.uk.invalid   
   REPLYTO 3:770/3.0 UUCP   
   MSGID:  b38eeb8c   
   PID: SoupGate-Win32 v1.05   
   Hi all. I think a latching relay is the way to go for a pico-based job I   
   have in mind. However the prevalent ones all seem to be controlled by a   
   pulse on a single input wire which flips and flops the state.   
      
   No doubt they reset to a known-state at power-up. But I see no   
   indication of any way of resetting them to that known state without   
   turning off the power - eg after reloading the pico control program.   
      
   Has anyone used these and can offer advice please? Thanks.   
      
      
   --   
   Mike Scott   
   Harlow, England   
      
   --- SoupGate-Win32 v1.05   
    * Origin: Agency HUB, Dunedin - New Zealand | Fido<>Usenet Gateway (3:770/3)   
   SEEN-BY: 4/0 19/10 88/0 90/0 93/1 105/81 106/201 128/187 129/305 153/757   
   SEEN-BY: 153/7715 154/110 218/700 840 220/70 221/1 6 360 226/17 30   
   SEEN-BY: 226/100 227/114 229/110 111 114 200 206 275 300 317 400 426   
   SEEN-BY: 229/428 470 550 616 664 700 705 266/512 267/800 291/111 292/854   
   SEEN-BY: 301/1 310/31 320/219 322/757 335/364 341/66 342/200 396/45   
   SEEN-BY: 460/58 633/280 712/848 770/1 3 100 330 340 772/210 220 230   
   SEEN-BY: 880/1 900/0 102 106 902/0 19 26 905/0 2320/105 5020/400 5075/35   
   PATH: 770/3 1 218/840 221/6 341/66 902/26 229/426