INTL 3:770/1 3:770/3   
   REPLYADDR news@cct-net.co.uk   
   REPLYTO 3:770/3.0 UUCP   
   MSGID:  5f831146   
   REPLY:  237f277f   
   PID: SoupGate-Win32 v1.05   
   On 25/01/2025 22:34, Chris Green wrote:   
   > I am trying to set up a new, headless Pi 4B.  I have copied the 'lite'   
   > image to a USB drive and created the empty 'ssh' file in the boot   
   > partition.   
   >   
   > It boots OK and the ssh deamon is running but the default username   
   > 'pi' and password 'raspberry' don't work. How on earth do I get into   
   > it to start it up?   
   >   
   > I can edit files on the USB drive OK so I can add and modify entries   
   > in /etc/passwd and /etc/shadow. So all I actually need to do is set it   
   > up so the user 'pi' has no password but I'm not doing too well at   
   > doing that at the moment.   
   >   
   > Any ideas, or other ways to get into it?   
   >   
   There is no longer a default user in current images. When you sue the   
   Raspberry Pi Imager, you must use the option to set a user and password,   
   and if needed to enable ssh   
      
   --   
   Chris   
      
   --- SoupGate-Win32 v1.05   
    * Origin: Agency HUB, Dunedin - New Zealand | Fido<>Usenet Gateway (3:770/3)   
   SEEN-BY: 19/38 105/81 106/201 128/187 129/305 153/757 7715 154/110   
   SEEN-BY: 218/700 840 220/70 226/17 30 100 227/114 229/110 111 114   
   SEEN-BY: 229/200 206 275 300 317 400 426 428 470 550 616 664 700 705   
   SEEN-BY: 266/512 267/800 291/111 292/854 310/31 320/219 322/757 342/200   
   SEEN-BY: 396/45 460/58 633/280 281 418 420 509 2744 712/848 770/1   
   SEEN-BY: 770/3 100 330 340 772/210 220 230 902/26 2320/105 5020/400   
   SEEN-BY: 5075/35   
   PATH: 770/3 1 633/280 229/426