|    RBERRYPI    |    Support for the Raspberry Pi device    |    21,939 messages    |
[   << oldest   |   < older   |   list   |   newer >   |   newest >>   ]
|    Message 21,220 of 21,939    |
|    Dennis Slagers to Chris Green    |
|    How to boot from SD but run from USB?    |
|    24 Jan 25 06:42:26    |
   
   REPLY: 9c386ef6   
   MSGID: 2:280/2060 6793299a   
   CHRS: CP437 2   
   TZUTC: 0100   
      
   Hello Chris!   
      
   23 Jan 25 22:12, you wrote to all:   
      
   Maybe this is useful   
      
   https://aroundmyroom.com/2018/07/28/update-boot-from-usb-with-hp   
   microserver-gen8-and-openmediavault/   
      
   and gives you hints   
      
   I own some HP Gen8 Microservers where you cannot boot (depends on how you want   
   to use the HDD's) from the ODD port, but you can use it to have a disk   
   connected to it for further use   
      
   So the trick is to boot from your SD and than tell Grub that it has to use   
   that device for the rest   
   so the USB disk (in my instance) was only getting start and than go further to   
   the SATA   
      
   But it should not matter if that is SD or USB whatever..   
      
   If you start chatgpt.com ..   
   and ask a question like   
      
   how to start from an SD card (initial boot) on a raspberry pi and than the   
   rest through grub starting to the USB ?   
      
   you get also an answer you might be able to use   
      
      
    CG> I'm sure this is basically easy but I can't find a simple description   
    CG> of how to do it. If you search for anything about 'boot' and 'USB'   
    CG> you are immediately flooded with descriptions of how to boot from USB   
    CG> and that's not what I want.   
      
    CG> I have an ancient Pi B+ that does all I need where it is but I'd like   
    CG> to be less reliant on the SD card. You can't (easily) boot such an   
    CG> old Pi from USB and I don't really need to, I just want to make it so   
    CG> that once booted all activity is on a USB drive.   
      
    CG> Is it simply a matter of leaving /boot on the SD card and changing /   
    CG> to being a USB drive or does one need to edit something in /boot   
    CG> somewhere?   
      
      
   Dennis   
      
      
   ... The network runs on duct tape and dreams.   
   --- GoldED+/LNX 1.1.5-b20240309   
    * Origin: ---- BOFH: Problem solved, user deleted. (2:280/2060)   
   SEEN-BY: 10/0 1 103/705 105/81 106/201 124/5016 128/187 129/305 153/7715   
   SEEN-BY: 154/110 218/0 1 601 700 221/1 6 242 226/30 227/114 229/110   
   SEEN-BY: 229/111 114 200 206 275 300 317 400 426 428 470 550 616 664   
   SEEN-BY: 229/700 705 230/0 240/1120 266/512 280/1049 1208 2000 2050   
   SEEN-BY: 280/2060 5003 5006 291/111 292/854 301/1 113 812 320/219   
   SEEN-BY: 322/757 335/364 342/200 396/45 423/81 460/58 633/280 712/848   
   SEEN-BY: 902/26 2320/105 5020/400 1042 5075/35   
   PATH: 280/2060 5003 221/1 301/1 218/700 229/426   
      
|
[   << oldest   |   < older   |   list   |   newer >   |   newest >>   ]
(c) 1994, bbs@darkrealms.ca