INTL 3:770/1 3:770/3   
   REPLYADDR sb.nospam@belgacom.net   
   REPLYTO 3:770/3.0 UUCP   
   MSGID:  1f5d3859   
   REPLY:  381efe6d   
   PID: SoupGate-Win32 v1.05   
   CHRS: LATIN-1 2   
   On 03 Dec 2024 10:13:01 +0000 (GMT), Theo wrote:   
      
   > I'm guessing that the blue pin is actually the speed control PWM, and the   
   > green is to report spin speed back to the Pi.  If you don't care about that   
   > you don't need it.   
   >   
   > If you're unsure, you can just wire red and black and ignore the other two   
   > wires - the fan should spin at full speed and you won't be able to sense the   
   > spin speed, but maybe that's ok.   
      
   Tnx for the follow-up. According to the shop I could just snip the green   
   wire, so I've done that. I've set it to run at 60°C and the fan's not   
   turning (CPU temperature is 48°C).   
      
   --   
   s|b   
      
   --- SoupGate-Win32 v1.05   
    * Origin: Agency HUB, Dunedin - New Zealand | Fido<>Usenet Gateway (3:770/3)   
   SEEN-BY: 10/0 1 19/10 103/705 105/81 106/201 124/5016 128/187 129/305   
   SEEN-BY: 153/757 7715 218/0 1 601 700 840 870 930 220/70 221/1 6 360   
   SEEN-BY: 226/17 30 100 227/114 229/110 111 114 200 206 300 317 400   
   SEEN-BY: 229/426 428 470 550 616 664 700 705 240/1120 266/512 267/800   
   SEEN-BY: 282/1038 291/111 292/854 301/1 113 812 310/31 320/219 322/757   
   SEEN-BY: 335/364 341/66 342/200 396/45 460/58 633/280 712/848 770/1   
   SEEN-BY: 770/3 100 330 340 772/210 220 230 902/26 5020/400 1042 5075/35   
   PATH: 770/3 1 218/840 221/6 301/1 218/700 229/426