INTL 3:770/1 3:770/3   
   REPLYADDR sb.nospam@belgacom.net   
   REPLYTO 3:770/3.0 UUCP   
   MSGID:  1f5d3859   
   REPLY:  381efe6d   
   PID: SoupGate-Win32 v1.05   
   CHRS: LATIN-1 2   
   On 03 Dec 2024 10:13:01 +0000 (GMT), Theo wrote:   
      
   > I'm guessing that the blue pin is actually the speed control PWM, and the   
   > green is to report spin speed back to the Pi.  If you don't care about that   
   > you don't need it.   
   >   
   > If you're unsure, you can just wire red and black and ignore the other two   
   > wires - the fan should spin at full speed and you won't be able to sense the   
   > spin speed, but maybe that's ok.   
      
   Tnx for the follow-up. According to the shop I could just snip the green   
   wire, so I've done that. I've set it to run at 60°C and the fan's not   
   turning (CPU temperature is 48°C).   
      
   --   
   s|b   
      
   --- SoupGate-Win32 v1.05   
    * Origin: Agency HUB, Dunedin - New Zealand | Fido<>Usenet Gateway (3:770/3)   
   SEEN-BY: 1/19 16/0 19/10 37 80/1 105/81 106/201 123/130 128/187 129/305   
   SEEN-BY: 142/104 153/757 7715 203/0 218/700 840 220/70 221/1 6 242   
   SEEN-BY: 221/360 226/17 30 100 227/114 229/110 111 114 200 206 300   
   SEEN-BY: 229/317 400 426 428 470 550 616 664 700 705 230/0 240/5832   
   SEEN-BY: 266/512 267/800 280/5003 282/1038 291/111 292/854 301/1 310/31   
   SEEN-BY: 320/119 219 319 2119 322/757 762 325/304 335/364 341/66 342/200   
   SEEN-BY: 396/45 423/81 460/58 633/280 712/848 770/1 3 100 330 340   
   SEEN-BY: 772/210 220 230 902/26 5020/400 5053/58 5075/35   
   PATH: 770/3 1 218/840 221/6 1 320/219 229/426