INTL 3:770/1 3:770/3   
   REPLYADDR bp@www.zefox.net   
   REPLYTO 3:770/3.0 UUCP   
   MSGID:  98880a8d   
   REPLY: <87v7wgw3sh.fsf@rpi3> 5709925e   
   PID: SoupGate-Win32 v1.05   
   Daniel  wrote:   
   >   
   > Found a teardown video and saw a custom ribbon cable utilized to connect   
   > the keyboard to the mobo - so that's a complication. After a bit of   
   > searching, they utilized one of the four usb ports in the hub for the   
   > keyboard logic.   
   >   
   > Has anyone managed a similar project with the experience to share?   
   >   
      
   The keyboard seems like an awkward place for the mobo. It's easier   
   imho to use the monitor as the foundation and fasten the Pi to the   
   back of it. Some Pi cases have keyed mounting holes that hang   
   the case neatly on wood or sheetmetal screws set in a (carefully   
   chosen non-interfering) convenient spot. Cables and keyboards are   
   thus standard, ventilation is decent. The Pi is as safe as the   
   monitor against mechanical mishap or abuse.   
      
   Hope this helps,   
      
   bob prohaska   
      
   --- SoupGate-Win32 v1.05   
    * Origin: Agency HUB, Dunedin - New Zealand | Fido<>Usenet Gateway (3:770/3)   
   SEEN-BY: 10/0 1 103/705 105/81 106/201 124/5016 128/187 129/305 153/757   
   SEEN-BY: 153/7715 218/0 1 601 700 840 870 930 220/70 221/1 6 360 226/17   
   SEEN-BY: 226/30 100 227/114 229/110 111 114 200 206 300 317 400 426   
   SEEN-BY: 229/428 470 550 616 664 700 240/1120 266/512 267/800 282/1038   
   SEEN-BY: 291/111 292/854 301/1 113 812 310/31 320/219 322/757 335/364   
   SEEN-BY: 341/66 342/200 396/45 460/58 633/280 712/848 770/1 3 100   
   SEEN-BY: 770/330 340 772/210 220 230 902/26 5020/400 1042 5075/35   
   PATH: 770/3 1 218/840 221/6 301/1 218/700 229/426