home bbs files messages ]

Just a sample of the Echomail archive

Cooperative anarchy at its finest, still active today. Darkrealms is the Zone 1 Hub.

   RBERRYPI      Support for the Raspberry Pi device      21,939 messages   

[   << oldest   |   < older   |   list   |   newer >   |   newest >>   ]

   Message 21,012 of 21,939   
   Daniel to All   
   Homebrew pi400   
   21 Nov 24 23:44:14   
   
   INTL 3:770/1 3:770/3   
   REPLYADDR me@sc1f1dan.com   
   REPLYTO 3:770/3.0 UUCP   
   MSGID: <87v7wgw3sh.fsf@rpi3> 5709925e   
   PID: SoupGate-Win32 v1.05   
   This past summer was a good time to lower the power bill and overall   
   temperature of the den by transitioning to rpi's for my computing   
   needs. The main pc was replaced by a pi400. Lovely, silent, low   
   power. Lovely.   
      
   Well, mostly so. I really don't like the keyboard and question why they   
   went with it. The full sized keyboard is something I miss, you know,   
   with the full row of function keys, dedicated number pad, full sized   
   arrows, the pageup.down,insert,delete cluster. The keys themselves suck   
   - where they often fail to register key presses and I have to fix   
   spelling quite often. I had hoped that the keys would wear in and solve   
   the problem, but it really just seems to be bad design. Hopes are it's   
   simply bad luck and a bad keyboard.   
      
   The problem is easy to solve by plugging in a usb keyboard, but it   
   defeats the appeal and purpose of the all-in-one design.   
      
   How hard would it be to rig the mobo into a full size keyboard shell?   
   Design a new lower shell of a chosen keyboard to accomodate the mobo and   
   port holes for 3d printing. A search online didn't yield evidence that   
   it has been done yet. But if this thing with it's massive heat sync can   
   fit in this small keyboard, it shouldn't have issues fitting in  full   
   sized keybord.   
      
   Found a teardown video and saw a custom ribbon cable utilized to connect   
   the keyboard to the mobo - so that's a complication. After a bit of   
   searching, they utilized one of the four usb ports in the hub for the   
   keyboard logic.   
      
   Has anyone managed a similar project with the experience to share?   
      
   Daniel   
      
   --- SoupGate-Win32 v1.05   
    * Origin: Agency HUB, Dunedin - New Zealand | Fido<>Usenet Gateway (3:770/3)   
   SEEN-BY: 10/0 1 103/705 105/81 106/201 124/5016 128/187 129/305 153/757   
   SEEN-BY: 153/7715 218/0 1 601 700 840 870 930 220/70 221/1 6 360 226/17   
   SEEN-BY: 226/30 100 227/114 229/110 111 114 200 206 300 317 400 426   
   SEEN-BY: 229/428 470 550 616 664 700 240/1120 266/512 267/800 282/1038   
   SEEN-BY: 291/111 292/854 301/1 113 812 310/31 320/219 322/757 335/364   
   SEEN-BY: 341/66 342/200 396/45 460/58 633/280 712/848 770/1 3 100   
   SEEN-BY: 770/330 340 772/210 220 230 902/26 5020/400 1042 5075/35   
   PATH: 770/3 1 218/840 221/6 301/1 218/700 229/426   
      

[   << oldest   |   < older   |   list   |   newer >   |   newest >>   ]


(c) 1994,  bbs@darkrealms.ca