INTL 3:770/1 3:770/3   
   REPLYADDR news@druck.org.uk   
   REPLYTO 3:770/3.0 UUCP   
   MSGID:  b6486589   
   REPLY:  26063174   
   PID: SoupGate-Win32 v1.05   
   On 20/09/2024 11:17, John Aldridge wrote:   
   [Reading ds18b20 sensors in parallel]   
   > No, but AIUI the "right" way to do this is to send the text "trigger" to   
   > /sys/bus/w1/devices/w1_bus_master1/therm_bulk_read before reading the   
   > values as normal. The trigger causes them all to start a conversion at   
   > once, following which the reads all complete immediately once a single   
   > conversion time has elapsed.   
   >   
   > As a quick hack, try executing the following before reading your   
   > sensors...   
   >   
   > sudo su < echo trigger > /sys/bus/w1/devices/w1_bus_master1/therm_bulk_read   
   > EOF   
      
   Thanks, that seems to works for the first bus, but I get a permission   
   denied when using w1_bus_master2.   
      
   ---druck   
      
   --- SoupGate-Win32 v1.05   
    * Origin: Agency HUB, Dunedin - New Zealand | Fido<>Usenet Gateway (3:770/3)   
   SEEN-BY: 10/0 1 90/1 103/705 105/81 106/201 124/5016 129/305 153/757   
   SEEN-BY: 153/7715 218/0 1 601 700 840 870 930 220/70 221/1 6 360 226/17   
   SEEN-BY: 226/30 100 227/114 229/110 111 114 200 206 300 317 400 426   
   SEEN-BY: 229/428 470 550 616 664 700 240/1120 266/512 267/800 282/1038   
   SEEN-BY: 291/111 292/854 301/1 113 812 310/31 320/219 322/757 335/364   
   SEEN-BY: 341/66 342/200 396/45 460/58 633/280 712/848 770/1 3 100   
   SEEN-BY: 770/330 340 772/210 220 230 5020/400 1042 5058/104 5075/35   
   PATH: 770/3 1 218/840 221/6 301/1 218/700 229/426