INTL 3:770/1 3:770/3   
   REPLYADDR news@druck.org.uk   
   REPLYTO 3:770/3.0 UUCP   
   MSGID:  46fbd903   
   PID: SoupGate-Win32 v1.05   
   After getting another Pi 5, I've moved a Pi 4B running Bookworm in to   
   the role taken by a Pi 3B running Bullseye, which is monitoring 6   
   ds18b20 sensors, configured as 2 1-wire buses with 3 sensors on each.   
      
   With the Pi 3B, I could either read the sensors sequentially taking   
   about 0.9s each, or using threads simultaneously in 1.0s. The Pi 4B with   
   Bookworm reads the sensors sequentially a shade faster at just over   
   0.8s, but when reading simultaneously, returns 2 after 0.8s, another 2   
   after 1.6s and the last two at 2.4s.   
      
   Anyone have an explanation for this?   
      
   It's not a problem as I changed some time ago from performing one   
   simultaneous read every 5 minutes to reading sequentially every minute   
   and averaging over 15 minutes.   
      
   ---druck   
      
   --- SoupGate-Win32 v1.05   
    * Origin: Agency HUB, Dunedin - New Zealand | Fido<>Usenet Gateway (3:770/3)   
   SEEN-BY: 19/38 90/1 105/81 106/201 129/305 153/757 7715 218/700 840   
   SEEN-BY: 220/70 226/17 30 100 227/114 229/110 111 114 200 206 300   
   SEEN-BY: 229/317 400 426 428 470 550 616 664 700 266/512 267/800 282/1038   
   SEEN-BY: 291/111 292/854 310/31 320/219 322/757 342/200 396/45 460/58   
   SEEN-BY: 633/280 281 412 418 420 509 2744 712/848 770/1 3 100 330   
   SEEN-BY: 770/340 772/210 220 230 5020/400 5075/35   
   PATH: 770/3 1 633/280 229/426