INTL 3:770/1 3:770/3   
   REPLYADDR noreply@ademu.nl   
   REPLYTO 3:770/3.0 UUCP   
   MSGID:  657c4fe6   
   REPLY: <3h3jej5072rp8v7dou767q1k75j7jrneeu@4ax.com> f07c07b4   
   PID: SoupGate-Win32 v1.05   
   XPost: sci.electronics.design   
      
   On 2024-09-17 16:15, john larkin wrote:   
   > On Tue, 17 Sep 2024 10:49:58 +0200, Arie de Muijnck    
   > wrote:   
   ...............   
   >> I think your idea would work OK, just a bit complex. Just NEVER short a cap   
   with a switch (or relay) without a series resistor.   
   >   
   > I don't think the 10u cap will weld the contacts of the pushbutton.   
   >   
      
   Probably not weld, but destroy the plating. The peak current is very high.   
   A 100R SMD resistor is not that expensive...   
      
   Arie   
      
   --- SoupGate-Win32 v1.05   
    * Origin: Agency HUB, Dunedin - New Zealand | Fido<>Usenet Gateway (3:770/3)   
   SEEN-BY: 10/0 1 90/1 103/705 105/81 106/201 124/5016 129/305 153/757   
   SEEN-BY: 153/7715 218/0 1 601 700 840 870 930 220/70 221/1 6 360 226/17   
   SEEN-BY: 226/30 100 227/114 229/110 111 114 200 206 300 317 400 426   
   SEEN-BY: 229/428 470 550 616 664 700 240/1120 266/512 267/800 282/1038   
   SEEN-BY: 291/111 292/854 301/1 113 812 310/31 320/219 322/757 335/364   
   SEEN-BY: 341/66 342/200 396/45 460/58 633/280 712/848 770/1 3 100   
   SEEN-BY: 770/330 340 772/210 220 230 5020/400 1042 5058/104 5075/35   
   PATH: 770/3 1 218/840 221/6 301/1 218/700 229/426