INTL 3:770/1 3:770/3   
   REPLYADDR bp@www.zefox.net   
   REPLYTO 3:770/3.0 UUCP   
   MSGID:  3f104b51   
   REPLY:  bf267433   
   PID: SoupGate-Win32 v1.05   
   druck  wrote:   
   > On 15/09/2024 23:37, bp@www.zefox.net wrote:   
   >> Chris Green  wrote:   
   >>> 3 - Is the Pi2 connected to the same network/router as the Pi5?   
   >>>   
   >> The DHCP range is limited to 192.168.1.nnn, with no distinction between   
   >> wired and wireless connections. There's clearly bridging from wirless to   
   >> wired devices such as the printer, which works and can be pinged.   
   >   
   > Unfortunately at one location I have to use an externally managed   
   > router/AP which bridges wireless and wired networks, but not between   
   > 2.4GHz and 5GHz WiFi.   
   >   
   > I couldn't talk to a Pi Zero which only uses 2.4GHz from the laptop   
   > which had connected to 5GHz. I had to go via another Raspberry Pi which   
   > was connected by Ethernet and could see devices both WiFi frequencies.   
   >   
   Was there any mention of this fact in the router docs? Perhaps an explanation   
   of why it's done? That would at least grant some mental peace....   
      
   Thanks for writing,   
      
   bob prohaska   
      
   --- SoupGate-Win32 v1.05   
    * Origin: Agency HUB, Dunedin - New Zealand | Fido<>Usenet Gateway (3:770/3)   
   SEEN-BY: 1/19 16/0 19/37 80/1 90/1 105/81 106/201 123/130 129/305   
   SEEN-BY: 134/100 142/104 153/135 143 148 151 757 7715 203/0 218/700   
   SEEN-BY: 218/840 220/70 221/1 6 242 360 226/17 30 100 227/114 229/110   
   SEEN-BY: 229/111 114 200 206 300 317 400 426 428 470 550 616 664 700   
   SEEN-BY: 230/0 240/5832 266/512 267/800 280/5003 282/1038 291/111   
   SEEN-BY: 292/854 301/1 310/31 320/119 219 319 2119 322/757 762 325/304   
   SEEN-BY: 335/364 341/66 342/200 396/45 423/81 460/58 633/280 712/848   
   SEEN-BY: 770/1 3 100 330 340 772/210 220 230 5020/400 5053/58 5058/104   
   SEEN-BY: 5075/35   
   PATH: 770/3 1 153/757 221/6 1 320/219 229/426