INTL 3:770/1 3:770/3   
   REPLYADDR cl@isbd.net   
   REPLYTO 3:770/3.0 UUCP   
   MSGID: <4amfrk-ar77.ln1@q957.zbmc.eu> 57267be3   
   REPLY:  4daed6f1   
   PID: SoupGate-Win32 v1.05   
   bp@www.zefox.net wrote:   
   > I've recently set up an old Pi2 for use with a USB oscilloscope.   
   > The scope software is point and click for the most part. Is there   
   > some user interface trick to limp along using a mouse alone? Almost   
   > no keyboard input is required, so it needn't be fast or easy.   
   >   
   > An attempt to run raspi-config by copying the filename via the   
   > file manager and pasting it into the "run command" dialog failed,   
   > with neither error nor execution, though the "open" option did   
   > start an editor. That was a surprise.   
   >   
   > Thanks for reading and any suggestions.   
   >   
   You need a virtual keyboard, a web search for 'pi virtual keyboard'   
   comes up with loads of hits.   
      
   There are several in the standard Raspbian repositories:-   
      
       apt search "on-screen keyboard"   
      
   --   
   Chris Green   
   ·   
      
   --- SoupGate-Win32 v1.05   
    * Origin: Agency HUB, Dunedin - New Zealand | Fido<>Usenet Gateway (3:770/3)   
   SEEN-BY: 19/38 90/1 105/81 106/201 129/305 153/757 7715 218/700 840   
   SEEN-BY: 220/70 226/17 30 100 227/114 229/110 111 114 200 206 300   
   SEEN-BY: 229/317 400 426 428 470 550 616 664 700 266/512 267/800 282/1038   
   SEEN-BY: 291/111 292/854 310/31 320/219 322/757 342/200 396/45 460/58   
   SEEN-BY: 633/280 281 412 418 420 509 2744 712/848 770/1 3 100 330   
   SEEN-BY: 770/340 772/210 220 230 5020/400 5075/35   
   PATH: 770/3 1 633/280 229/426