INTL 3:770/1 3:770/3   
   REPLYADDR bp@www.zefox.net   
   REPLYTO 3:770/3.0 UUCP   
   MSGID:  4daed6f1   
   PID: SoupGate-Win32 v1.05   
   I've recently set up an old Pi2 for use with a USB oscilloscope.   
   The scope software is point and click for the most part. Is there   
   some user interface trick to limp along using a mouse alone? Almost   
   no keyboard input is required, so it needn't be fast or easy.   
      
   An attempt to run raspi-config by copying the filename via the   
   file manager and pasting it into the "run command" dialog failed,   
   with neither error nor execution, though the "open" option did   
   start an editor. That was a surprise.   
      
   Thanks for reading and any suggestions.   
      
   bob prohaska   
      
   --- SoupGate-Win32 v1.05   
    * Origin: Agency HUB, Dunedin - New Zealand | Fido<>Usenet Gateway (3:770/3)   
   SEEN-BY: 10/0 1 90/1 103/705 105/81 106/201 124/5016 129/305 153/757   
   SEEN-BY: 153/7715 218/0 1 601 700 840 870 930 220/70 221/1 6 360 226/17   
   SEEN-BY: 226/30 100 227/114 229/110 111 114 200 206 300 317 400 426   
   SEEN-BY: 229/428 470 550 616 664 700 240/1120 266/512 267/800 282/1038   
   SEEN-BY: 291/111 292/854 301/1 113 812 310/31 320/219 322/757 335/364   
   SEEN-BY: 341/66 342/200 396/45 460/58 633/280 712/848 770/1 3 100   
   SEEN-BY: 770/330 340 772/210 220 230 5020/400 1042 5058/104 5075/35   
   PATH: 770/3 1 218/840 221/6 301/1 218/700 229/426