INTL 3:770/1 3:770/3
REPLYADDR tnp@invalid.invalid
REPLYTO 3:770/3.0 UUCP
MSGID: bf12a9b8
REPLY: 62e598c3
PID: SoupGate-Win32 v1.05
On 16/08/2024 12:52, Jesper wrote:
> On 16.08.2024 13:23, The Natural Philosopher wrote:
>> On 16/08/2024 12:19, Jesper wrote:
>>> On 16.08.2024 12:40, The Natural Philosopher wrote:
>>>> On 16/08/2024 10:04, Jesper wrote:
>>>>> On 01.08.2024 21:38, Björn Lundin wrote:
>>>>>> On 2024-08-01 21:02, Jesper wrote:
>>>>>>> On 01.08.2024 20:29, Ahem A Rivet's Shot wrote:
>>>>>>>> On Thu, 1 Aug 2024 19:50:20 +0200
>>>>>>>> Jesper wrote:
>>>>>>>>
>>>>>>
>>>>>>> But I still do not know what a command that clones both sda1 and
>>>>>>> sda2 to NVME should look like. Please?
>>>>>>
>>>>>> Really? It is given to you more than once
>>>>>>
>>>>>> dd if=/dev/sda of=/dev/nvme0n1 bs=1m
>>>>>>
>>>>>
>>>>> Now I have the nvme installed and showing in a lsblk command.
>>>>> Booted from a SD-card and did a few tries to copy the system from
>>>>> SSD to nvme.
>>>>> First there was a complaint about the switch "1m". Changed it to
>>>>> "1b" and got a complaint about missing permission to open SDA (the
>>>>> SSD I want to copy from). Threw a sudo at it, and it ran for maybe
>>>>> half an hour, until it stopped with error "writing nvme0n1, No
>>>>> space left on device".
>>>>> The SSD and the nvme have the same size, and that seems to be a
>>>>> problem.
>>>>> Bright ideas are welcome :-)
>>>>>
>>>>> Below I have copied in what happend in the command line:
>>>>> raspberrypi@raspberrypi:~ $ lsblk
>>>>> NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINTS
>>>>> sda 8:0 0 238.5G 0 disk
>>>>> ├─sda1 8:1 0 512M 0 part /me
ia/raspberrypi/bootfs
>>>>> └─sda2 8:2 0 238G 0 part /me
ia/raspberrypi/rootfs
>>>>> mmcblk0 179:0 0 58G 0 disk
>>>>> ├─mmcblk0p1 179:1 0 512M 0 part /boot/firmware
>>>>> └─mmcblk0p2 179:2 0 57.5G 0 part /
>>>>> nvme0n1 259:0 0 238.5G 0 disk
>>>>> raspberrypi@raspberrypi:~ $ dd if=/dev/sda of=/nvme0n1 bs=1m
>>>>> dd: invalid number: ‘1m’
>>>>> raspberrypi@raspberrypi:~ $ dd if=/dev/sda of=/nvme0n1 bs=1b
>>>>> dd: failed to open '/dev/sda': Permission denied
>>>>> raspberrypi@raspberrypi:~ $ dd if=/dev/sda of=/nvme0n1
>>>>> dd: failed to open '/dev/sda': Permission denied
>>>>> raspberrypi@raspberrypi:~ $ sudo dd if=/dev/sda of=/nvme0n1 bs=1b
>>>>> dd: error writing '/nvme0n1': No space left on device
>>>>> 107929249+0 records in
>>>>> 107929248+0 records out
>>>>> 55259774976 bytes (55 GB, 51 GiB) copied, 1476.65 s, 37.4 MB/s
>>>>> raspberrypi@raspberrypi:~
>>>>>
>>>>> Best regards
>>>>
>>> Thank you for the reply.
>>>> WTF is '/nvme0n1' ?
>>> "nvme0n1" is the "fucking" NVME I have installed in the raspi5.
>>
>> Not as far as dd is concerned.
>> What does the outpout of
>> ls /n*
> raspberrypi@raspberrypi:~ $ ls /n*
> ls: klarte ikke å åpne '/n*': Ingen slik fil eller filkatalog
> It means "Could not open /n*. No such file or catalog"
>
So there is no '/nvme0n1' to copy to is there?
IT ISN'T your NVM.
>> and
>> ls /dev/n*
>> show?
> raspberrypi@raspberrypi:~ $ ls /dev/n*
> /dev/ng0n1 /dev/null /dev/nvme0 /dev/nvme0n1
>
Right. so the draw device ce is /dev/nvme0
So try
sudo dd if=/dev/sda of=/dev/nvme0 bs=1M
Note:
/dev/nvme0 NOT /nvme0n1
1M not 1m.
>
--
“Some people like to travel by train because it combines the slowness of
a car with the cramped public exposure of
an airplane.”
Dennis Miller
--- SoupGate-Win32 v1.05
* Origin: Agency HUB, Dunedin - New Zealand | Fido<>Usenet Gateway (3:770/3)
SEEN-BY: 10/0 1 90/1 103/705 105/81 106/201 124/5016 129/305 153/757
SEEN-BY: 153/7715 218/0 1 601 700 840 870 930 220/70 221/1 6 360 226/17
SEEN-BY: 226/30 100 227/114 229/110 111 114 200 206 300 317 400 426
SEEN-BY: 229/428 470 550 616 664 700 240/1120 266/512 267/800 282/1038
SEEN-BY: 291/111 292/854 301/1 113 812 310/31 320/219 322/757 335/364
SEEN-BY: 341/66 342/200 396/45 460/58 633/280 712/848 770/1 3 100
SEEN-BY: 770/330 340 772/210 220 230 5020/400 1042 5058/104 5075/35
PATH: 770/3 1 218/840 221/6 301/1 218/700 229/426
|
