INTL 3:770/1 3:770/3   
   REPLYADDR tnp@invalid.invalid   
   REPLYTO 3:770/3.0 UUCP   
   MSGID:  ebe86551   
   REPLY:  2598c100   
   PID: SoupGate-Win32 v1.05   
   On 16/08/2024 10:04, Jesper wrote:   
   > On 01.08.2024 21:38, Björn Lundin wrote:   
   >> On 2024-08-01 21:02, Jesper wrote:   
   >>> On 01.08.2024 20:29, Ahem A Rivet's Shot wrote:   
   >>>> On Thu, 1 Aug 2024 19:50:20 +0200   
   >>>> Jesper  wrote:   
   >>>>   
   >>   
   >>> But I still do not know what a command that clones both sda1 and sda2   
   >>> to NVME should look like. Please?   
   >>   
   >> Really? It is given to you more than once   
   >>   
   >> dd if=/dev/sda of=/dev/nvme0n1 bs=1m   
   >>   
   >   
   > Now I have the nvme installed and showing in a lsblk command.   
   > Booted from a SD-card and did a few tries to copy the system from SSD to   
   > nvme.   
   > First there was a complaint about the switch "1m". Changed it to "1b"   
   > and got a complaint about missing permission to open SDA (the SSD I want   
   > to copy from). Threw a sudo at it, and it ran for maybe half an hour,   
   > until it stopped with error "writing nvme0n1, No space left on device".   
   > The SSD and the nvme have the same size, and that seems to be a problem.   
   >   Bright ideas are welcome :-)   
   >   
   > Below I have copied in what happend in the command line:   
   > raspberrypi@raspberrypi:~ $ lsblk   
   > NAME        MAJ:MIN RM   SIZE RO TYPE MOUNTPOINTS   
   > sda           8:0    0 238.5G  0 disk   
   > ├─sda1        8:1    0   512M  0 part /media/   
   aspberrypi/bootfs   
   > └─sda2        8:2    0   238G  0 part /media/   
   aspberrypi/rootfs   
   > mmcblk0     179:0    0    58G  0 disk   
   > ├─mmcblk0p1 179:1    0   512M  0 part /boot/firmware   
   > └─mmcblk0p2 179:2    0  57.5G  0 part /   
   > nvme0n1     259:0    0 238.5G  0 disk   
   > raspberrypi@raspberrypi:~ $ dd if=/dev/sda of=/nvme0n1 bs=1m   
   > dd: invalid number: ‘1m’   
   > raspberrypi@raspberrypi:~ $ dd if=/dev/sda of=/nvme0n1 bs=1b   
   > dd: failed to open '/dev/sda': Permission denied   
   > raspberrypi@raspberrypi:~ $ dd if=/dev/sda of=/nvme0n1   
   > dd: failed to open '/dev/sda': Permission denied   
   > raspberrypi@raspberrypi:~ $ sudo dd if=/dev/sda of=/nvme0n1 bs=1b   
   > dd: error writing '/nvme0n1': No space left on device   
   > 107929249+0 records in   
   > 107929248+0 records out   
   > 55259774976 bytes (55 GB, 51 GiB) copied, 1476.65 s, 37.4 MB/s   
   > raspberrypi@raspberrypi:~   
   >   
   > Best regards   
      
   WTF is '/nvme0n1' ?   
      
   It looks like you have created a file in the root directory of the   
   device you are copying from....   
      
      
      
      
   --   
   "Nature does not give up the winter because people dislike the cold."   
      
   ― Confucius   
      
   --- SoupGate-Win32 v1.05   
    * Origin: Agency HUB, Dunedin - New Zealand | Fido<>Usenet Gateway (3:770/3)   
   SEEN-BY: 10/0 1 90/1 103/705 105/81 106/201 124/5016 129/305 153/757   
   SEEN-BY: 153/7715 218/0 1 601 700 840 870 930 220/70 221/1 6 360 226/17   
   SEEN-BY: 226/30 100 227/114 229/110 111 114 200 206 300 317 400 426   
   SEEN-BY: 229/428 470 550 616 664 700 240/1120 266/512 267/800 282/1038   
   SEEN-BY: 291/111 292/854 301/1 113 812 310/31 320/219 322/757 335/364   
   SEEN-BY: 341/66 342/200 396/45 460/58 633/280 712/848 770/1 3 100   
   SEEN-BY: 770/330 340 772/210 220 230 5020/400 1042 5058/104 5075/35   
   PATH: 770/3 1 218/840 221/6 301/1 218/700 229/426