|    RBERRYPI    |    Support for the Raspberry Pi device    |    21,939 messages    |
[   << oldest   |   < older   |   list   |   newer >   |   newest >>   ]
|    Message 20,413 of 21,939    |
|    Daniel to All    |
|    Re: DIY 3d printed Rpi4    |
|    14 Aug 24 21:49:12    |
   
   INTL 3:770/1 3:770/3   
   REPLYADDR me@sc1f1dan.com   
   REPLYTO 3:770/3.0 UUCP   
   MSGID: <87ttfm6d9z.fsf@rpi3> 946935be   
   REPLY: a3fb1c8c   
   PID: SoupGate-Win32 v1.05   
   john larkin writes:   
      
   > On Wed, 14 Aug 2024 16:36:55 +0100, Daniel wrote:   
   >   
   >>This URL was shared on the bitchin100 listserv, so I take no credit in   
   >>finding it.   
   >>   
   >>Enjoy   
   >>   
   >>https://www.tomshardware.com/raspberry-pi/this-1980s-inspired-   
   d-printed-raspberry-pi-laptop-is-built-around-a-pico-powered-mec   
   anical-keyboard   
   >>   
   >>Cool project -   
   >>   
   >>Daniel   
   >   
   > Why not buy a Pi 400 for $70?   
      
   Not sure why the Pi400 is relevant to a laptop. I was simply sharing an   
   article about a cool project.   
      
   D   
      
   --- SoupGate-Win32 v1.05   
    * Origin: Agency HUB, Dunedin - New Zealand | Fido<>Usenet Gateway (3:770/3)   
   SEEN-BY: 10/0 1 90/1 103/705 105/81 106/201 124/5016 129/305 153/757   
   SEEN-BY: 153/7715 218/0 1 601 700 840 870 930 220/70 221/1 6 360 226/17   
   SEEN-BY: 226/30 100 227/114 229/110 111 114 200 206 300 317 400 426   
   SEEN-BY: 229/428 470 550 616 664 700 240/1120 266/512 267/800 282/1038   
   SEEN-BY: 291/111 292/854 301/1 113 812 310/31 320/219 322/757 335/364   
   SEEN-BY: 341/66 342/200 396/45 460/58 633/280 712/848 770/1 3 100   
   SEEN-BY: 770/330 340 772/210 220 230 5020/400 1042 5058/104 5075/35   
   PATH: 770/3 1 218/840 221/6 301/1 218/700 229/426   
      
|
[   << oldest   |   < older   |   list   |   newer >   |   newest >>   ]
(c) 1994, bbs@darkrealms.ca