INTL 3:770/1 3:770/3
REPLYADDR address@is.invalid
REPLYTO 3:770/3.0 UUCP
MSGID: 7d5558df
REPLY: 0dd4fd5d
PID: SoupGate-Win32 v1.05
Björn,
>> ... Though my guess is that he doesn't actually know much of anything
>> about
>> it. Just some "big words" he tried to impress me with.
>
> Most people on this list would interpret 'SSH?' as
>
> since the pi likely has a ssh-deamon running, from another commputer ssh
> to the pi
>
> so get the ip of the pi, and connect another pc to the same network and
> type
So would I.
But in my particular case that would be a problem.
And I'm not talking about that I would need to keep a 'puter at ready just
to be able to check that the RPi shut down correctly.
Though the problem I referred to would make moot of that.
Than again, if someone would have realized (or just asked for!) the problem
I referred to (s)he might have been able to suggest another way to talk to
the RPi. Which would un-moot the "keep a 'puter at ready" issue. :-)
Remark:
Although I would like to see someone figuring out/realizing what my "but at
the same time creating the next" problem is (hint, the cause has been quoted
here), I hope that everyone here realizes that this whole "disable HDMI
output" subthread is moot, as, as already mentioned, it doesn't do anything
for me in regard to my initial question, having the TV switch away from the
RPi when the latter is shut down.
Regards,
Rudy Wieser
--- SoupGate-Win32 v1.05
* Origin: Agency HUB, Dunedin - New Zealand | Fido<>Usenet Gateway (3:770/3)
SEEN-BY: 90/1 105/81 106/201 129/305 153/757 7715 218/700 840 220/70
SEEN-BY: 221/1 6 242 360 226/17 30 100 227/114 229/110 111 200 206
SEEN-BY: 229/300 317 400 426 428 470 550 616 664 700 230/0 266/512
SEEN-BY: 267/800 280/5003 282/1038 291/111 292/854 2226 8125 301/1
SEEN-BY: 310/31 320/219 322/757 335/364 341/66 342/200 396/45 410/9
SEEN-BY: 423/81 460/58 633/280 712/848 770/1 3 100 330 340 772/210
SEEN-BY: 772/220 230 5020/400 5058/104 5075/35
PATH: 770/3 1 218/840 221/6 1 292/854 229/426
|
