INTL 3:770/1 3:770/3   
   REPLYADDR news@cct-net.co.uk   
   REPLYTO 3:770/3.0 UUCP   
   MSGID:  f917be41   
   REPLY:  89c58156   
   PID: SoupGate-Win32 v1.05   
   On 31/07/2024 23:28, Lawrence D'Oliveiro wrote:   
   > On Wed, 31 Jul 2024 09:51:00 +0200, Jesper wrote:   
   >   
   >>      3: Connect NVME to raspi, boot from SD-card and copy the system from   
   >> SSD to NVME. But how?   
   >   
   > Use rsync to do a file-level copy. Then the difference in volume sizes   
   > won’t matter.   
   >   
   > I haven’t done this on ARM, only on x86 machines (several times), but the   
   > procedure should be similar: after copying the installation across, you   
   > will need to fix up /etc/fstab for the changed filesystem IDs, and also   
   > reinstall the bootloader. Then you should be good to go.   
      
   If you can create an image - there are various tools to do that, then   
   use the Raspberry Pi imager onto the NVME drive. That is what I did to   
   move from a USB SSD to NVME, when I finally got an adapter   
      
   --   
   Chris   
      
   --- SoupGate-Win32 v1.05   
    * Origin: Agency HUB, Dunedin - New Zealand | Fido<>Usenet Gateway (3:770/3)   
   SEEN-BY: 90/1 105/81 106/201 129/305 134/100 153/135 143 148 151 757   
   SEEN-BY: 153/7715 218/700 840 220/70 221/1 6 242 360 226/17 30 100   
   SEEN-BY: 227/114 229/110 111 114 200 206 300 317 400 426 428 470 550   
   SEEN-BY: 229/616 664 700 230/0 266/512 267/800 280/5003 282/1038 291/111   
   SEEN-BY: 292/854 2226 8125 301/1 310/31 320/219 322/757 335/364 341/66   
   SEEN-BY: 342/200 396/45 410/9 423/81 460/58 633/280 712/848 770/1   
   SEEN-BY: 770/3 100 330 340 772/210 220 230 5020/400 5058/104 5075/35   
   PATH: 770/3 1 153/757 221/6 1 292/854 229/426