INTL 3:770/1 3:770/3   
   REPLYADDR joerg.walther@magenta.de   
   REPLYTO 3:770/3.0 UUCP   
   MSGID:  23eb6c52   
   REPLY:  a1b54743   
   PID: SoupGate-Win32 v1.05   
   R.Wieser wrote:   
      
   >> Have you tried powering down your pi? - does it switch then?   
   >   
   >Yep, nope (I just repeated the test to be sure I did).  The TV just keeps   
   >showing a "no signal" message.   
      
   Then there is nothing you can do about the pi, it's turned off. So you   
   must check if there is a setting on your HDMI switch to make him switch   
   back when there is no signal on input x. If you don't have a setting for   
   this behaviour you need a different switch.   
      
   -jw-   
   --   
   And now for something completely different...   
      
   --- SoupGate-Win32 v1.05   
    * Origin: Agency HUB, Dunedin - New Zealand | Fido<>Usenet Gateway (3:770/3)   
   SEEN-BY: 90/1 105/81 106/201 129/305 153/757 7715 218/700 840 220/70   
   SEEN-BY: 221/1 6 242 360 226/17 30 100 227/114 229/110 111 114 200   
   SEEN-BY: 229/206 300 317 400 426 428 470 550 616 664 700 230/0 266/512   
   SEEN-BY: 267/800 280/5003 282/1038 291/111 292/854 2226 8125 301/1   
   SEEN-BY: 310/31 320/219 322/757 335/364 341/66 342/200 396/45 410/9   
   SEEN-BY: 423/81 460/58 633/280 712/848 770/1 3 100 330 340 772/210   
   SEEN-BY: 772/220 230 5020/400 5058/104 5075/35   
   PATH: 770/3 1 218/840 221/6 1 292/854 229/426