INTL 3:770/1 3:770/3   
   REPLYADDR theom+news@chiark.greenend.org.uk   
   REPLYTO 3:770/3.0 UUCP   
   MSGID:  544fd5b3   
   REPLY:  fdb4541e   
   PID: SoupGate-Win32 v1.05   
   Adam Funk  wrote:   
   > Hi   
   >   
   > I have a Pi 4 B that I use headlessly over SSH. I can't remember   
   > whether I installed the 32-bit or 64-bit OS on it, but different   
   > commands found on the web give different results.   
   >   
   > $ uname -m   
   > aarch64   
   >   
   > $ getconf LONG_BIT   
   > 32   
   >   
   > $ dpkg --print-architecture   
   > armhf   
   >   
   > Which one is right?   
      
   That sounds like a 32 bit OS on 64 bit hardware.  Not sure if uname -m is   
   the kernel or the hardware, but perhaps you're running a 32 bit userland on   
   a 64 bit kernel?   
      
   Seems that Pi OS switched to a 64 bit kernel on the Pi4 in March 2023:   
   https://github.com/raspberrypi/firmware/issues/1795   
      
   It looks like 'getconf' returns glibc parameters, which would be 32 bit on a   
   32 bit userland.   
      
   Theo   
      
   --- SoupGate-Win32 v1.05   
    * Origin: Agency HUB, Dunedin - New Zealand | Fido<>Usenet Gateway (3:770/3)   
   SEEN-BY: 90/1 105/81 106/201 128/260 129/305 153/757 7715 218/700   
   SEEN-BY: 218/840 220/70 221/1 6 242 360 226/17 30 100 227/114 229/110   
   SEEN-BY: 229/111 112 113 200 206 300 317 400 426 428 470 550 616 664   
   SEEN-BY: 229/700 230/0 266/512 267/800 280/5003 282/1038 291/111 292/854   
   SEEN-BY: 292/2226 8125 301/1 310/31 320/219 322/757 335/364 341/66   
   SEEN-BY: 342/200 396/45 410/9 423/81 460/58 633/280 712/848 770/1   
   SEEN-BY: 770/3 100 330 340 772/210 220 230 5020/400 5058/104 5075/35   
   PATH: 770/3 1 218/840 221/6 1 292/854 229/426