INTL 3:770/1 3:770/3
REPLYADDR none@nowhere.whereo
REPLYTO 3:770/3.0 UUCP
MSGID: <18bi8j13p3mmuttm25585gpig0c52ur037@4ax.com> 19da650d
REPLY: e8ec5110
PID: SoupGate-Win32 v1.05
On Fri, 5 Jul 2024 14:51:55 +0100, The Natural Philosopher wrote:
>On 05/07/2024 13:32, Joe wrote:
>> On Tue, 2 Jul 2024 21:06:38 +0100, The Natural Philosopher wrote:
>>
>>> On 02/07/2024 16:11, Chris Townley wrote:
>>>> Good routers monitor nearby signals, and will change channel to avoid
>>>> conflicts. With some you can override this
>>>
>>> Ive never ever found a router that does that.
>>> And my router us VERY good
>>
>> Automatic channel setting with the option to overrule. Mine has it, I've
switched it off as it forces connected devices to also
>> dynamically switch channels. So: Pick the "cleanest" channel at your
router and make it fixed. Do the same for possible
>> accesspoint (best is "the same" channel to allow seamless takeover).
>
>My router has an 'auto' setting for channel. Is that it? Why would
>anyine use it?
Yes, why? Only if your neighbours use it ;-) Find a quiet (the quietest)
channel and set that. Also - if you don't need the extra
speed, limit bandwidth (adjacent channel usage). And on 5GHz, avoid channels
in the radar band.
--- SoupGate-Win32 v1.05
* Origin: Agency HUB, Dunedin - New Zealand | Fido<>Usenet Gateway (3:770/3)
SEEN-BY: 10/0 1 90/1 103/705 105/81 106/201 124/5016 128/260 129/305
SEEN-BY: 153/757 7715 218/0 1 601 700 840 870 930 220/70 221/1 6 360
SEEN-BY: 226/17 30 100 227/114 229/110 111 112 113 200 206 300 317
SEEN-BY: 229/400 426 428 470 550 616 664 700 240/1120 266/512 267/800
SEEN-BY: 282/1038 291/111 292/854 301/1 113 812 310/31 320/219 322/757
SEEN-BY: 335/364 341/66 342/200 396/45 460/58 633/280 712/848 770/1
SEEN-BY: 770/3 100 330 340 772/210 220 230 5020/400 1042 5058/104
SEEN-BY: 5075/35
PATH: 770/3 1 218/840 221/6 301/1 218/700 229/426
|
